iPod
Basic Operations
Playing songs on iPod
1
Open the USB connector cover.
2
Plug in an iPod using an iPod Dock Connector to
USB Cable.
Selecting a track (chapter)
1
Push
M.C.
left or right.
Fast forwarding or reversing
1
Push and hold
M.C.
left or right.
Notes
!
The iPod
’
s battery will be charged if the igni-
tion switch is set to ACC or ON, while con-
nected.
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off unless the
control mode is set to
iPod
.
!
Disconnect headphones from the iPod before
connecting to this unit.
!
The iPod will turn off about two minutes after
the ignition switch is set to OFF.
Displaying text information
Selecting the desired text information
1
Press
/
DISP
/
SCRL
.
Play time
—
song title
—
artist name
—
album title
—
number of songs
Scrolling the text information to the left
1
Press and hold
/
DISP
/
SCRL
.
Note
Incompatible text saved on the iPod will not be
displayed by the unit.
Browsing for a song
1
Press
to switch to the top menu of
the list search.
2
Use M.C. to select a category/song.
Changing the name of song or category
1
Turn
M.C.
Playlists
—
artists
—
albums
—
songs
—
podcasts
—
genres
—
composers
—
audiobooks
Playing
1
When a song is selected, press
M.C.
Seeing a list of songs in the selected category
1
When a category is selected, press
M.C.
Playing a song in the selected category
1
When a category is selected, press and hold
M.C.
Searching by alphabet in the list
1
When a list for the selected category is displayed,
press
to switch to alphabet search mode.
2
Turn
M.C.
to select a letter.
3
Press
M.C.
to display the alphabetical list.
If alphabet search is aborted,
NOT FOUND
is dis-
played.
Note
Depending on the number of files in the iPod,
there may be a delay when displaying a list.
Operating this unit
En
12
Section
02
