Pioneer DEH-2350UB, Руководство пользователя

Страница: 4 / 64

Tuner
Basic Operations
Selecting a band
(DEH-2350UB/DEH-2350UBG)
1
Press B (BAND/ESC) until the desired band ( F1 ,
F2 , F3 for FM or AM1 ) is displayed.
(DEH-2350UBSW)
1
Press B (BAND/ESC) until the desired band ( F1 /
F2
/
F3
for FM,
MW
or
S1
/
S2
for Short Wave) is
displayed.
!
You cannot receive S1 / S2 band depending on the
area.
Manual tuning (step by step)
1
Press
c
or
d
.
Seeking
1
Press and hold c or d , and then release.
You can cancel seek tuning by briefly pressing
c
or
d
.
While pressing and holding
c
or
d
, you can skip
stations. Seek tuning starts as soon as you re-
lease
c
or
d
.
Storing and recalling stations
for each band
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2 Press one of the preset tuning buttons
(1 to 6) to select the desired station.
#
You can also recall stored radio stations by
pressing
a
or
b
during the frequency display.
Switching the display
Selecting the desired text information
%
Press
.
Program service name
—
Frequency
#
The frequency appear on the display for eight
seconds.
Note
Depending on the area, you cannot switch the
display.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1
Press
M.C.
to turn BSM on.
To cancel, press M.C. again.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
FM:
OFF
—
LEVEL 1
—
LEVEL 2
—
LEVEL 3
—
LEVEL
4
AM/MW/SW: OFF
—
LEVEL 1
—
LEVEL 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
3
Press M.C. to confirm the selection.
CD/CD-R/CD-RW and USB
storage devices
Basic Operations
Playing a CD/CD-R/CD-RW
1
Insert the disc into the disc loading slot with the
label side up.
Ejecting a CD/CD-R/CD-RW
1
Press
h
.
En
6
Section
02
Operating this unit
Playing songs on a USB storage device
1
Open the USB connector cover and plug in the
USB storage device using a USB cable.
Stopping playback of files on a USB storage device
1
You may disconnect the USB storage device at
anytime.
Selecting a folder
1
Press a or b .
Selecting a track
1
Press
c
or
d
.
Fast forwarding or reversing
1
Press and hold
c
or
d
.
!
When playing compressed audio, there is no
sound during fast forward or reverse.
Returning to root folder
1
Press and hold
B (BAND/ESC)
.
Switching between compressed audio and CD-DA
1
Press B (BAND/ESC) .
Note
Disconnect USB storage devices from the unit
when not in use.
Displaying text information
Selecting the desired text information
1
Press .
Scrolling the text information to the left
1
Press and hold .
Notes
!
Depending on the version of iTunes used to
write MP3 files to a disc or media file types, in-
compatible text stored within an audio file
may be displayed incorrectly.
!
Text information items that can be changed
depend on the media.
Selecting and playing files/
tracks from the name list
1 Press to switch to the file/track
name list mode.
2 Use M.C. to select the desired file name
(or folder name).
Changing the file or folder name
1
Turn
M.C.
Playing
1
When a file or track is selected, press M.C.
Viewing a list of the files (or folders) in the selected
folder
1
When a folder is selected, press M.C.
Playing a song in the selected folder
1
When a folder is selected, press and hold M.C.
Advanced operations using
special buttons
Selecting a repeat play range
1
Press
6
/ to cycle between the following:
CD/CD-R/CD-RW
!
DISC
–
Repeat all tracks
!
TRACK
–
Repeat the current track
!
FOLDER
–
Repeat the current folder
USB audio player/USB memory
!
ALL
–
Repeat all files
!
TRACK
–
Repeat the current file
!
FOLDER
–
Repeat the current folder
Playing tracks in random order
1
Press 5 / to turn random play on or off.
Tracks in a selected repeat range are played in
random order.
Pausing playback
1
Press
2
/
PAUSE
to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
1
Press
1
/
S.Rtrv
to cycle between:
OFF (off)
—
1
—
2
1
is effective for low compression rates, and
2
is
effective for high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
En
7
English
Section
02
Operating this unit
<CRD4530-A/N>4