!
If a track number 100 or more is selected,
d
on the left of the track number indica-
tor will light.
3
AF indicator
Appears when AF (alternative frequencies
search) function is on.
4
TP indicator
Appears when a TP station is tuned in.
5
TA indicator
Appears when TA (traffic announcement
standby) function is on.
6
MP3/WMA indicator
Shows the type of the currently playing disc.
7
RPT indicator
Shows when repeat play is turned on.
8
LOUD indicator
Appears when loudness is on.
9
5
(stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
a
LOC indicator
Appears when local seek tuning is on.
Basic Operations
Power ON/OFF
Turning the unit on
%
Press SOURCE to turn the unit on.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Selecting a source
You can select a source you want to listen to.
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources.
Tuner
—
Built-in CD player
—
AUX
Notes
!
In the following cases, the sound source will
not change.
—
When there is no disc in the unit.
—
When AUX (auxiliary input) is set to off
(refer to page 13).
!
AUX is set to on by default. Turn off the AUX
when not in use (refer to
Switching the auxili-
ary setting
on page 13).
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Turn VOLUME to adjust the sound level.
Tuner
Listening to the radio
1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
for
FM or
MW/LW
) is displayed.
3
To perform manual tuning, briefly press
c
or
d
.
4
To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
Operating this unit
En
6
Section
02