Pioneer DC-490V-S, Руководство по эксплуатации

Страница: 39 / 48

Connecting up 02
11
En
Chapter 2
Connecting up
Easy connections
• Before making or changing any connections, switch off the power and disconnect the power
cable from the AC outlet.
• The setup described here is a basic setup that allows you to play discs using just the cables
supplied with the player. In this setup, stereo audio is played through the speakers in your TV.
• The following illustrations show the DV-393, but connections for the DV-490V are the same
except where indicated.
Important
• This player is equipped with copy protection technology. Do not connect this player to your TV
via a VCR using audio/video or S-video cables, as the picture from this player will not appear
properly on your TV. (This player may also not be compatible with some combination TV/VCRs
for the same reason; refer to the manufacturer for more information.)
• When connecting to your TV as shown above, do not set the Component Out setting (See
Video Output settings on page 35) to
Progressive
.
Yellow
White
Red
TV
A/V IN
To power
outlet
DV393 KU.book Page 11 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
13
En
Watching progressive scan video
from the component video outputs
This player can output progressive scan video
from the component video output. Compared
to interlace video, progressive scan video
effectively doubles the scanning rate of the
picture, resulting in a very stable, flicker-free
image.
To set up the player for use with a progressive
scan TV, see
Video Output settings on page 35.
When the player is set to output progressive
scan video, the
PRGSVE indicator lights in the
front panel display.
Important
• When Component Out (page 35) is set to
Progressive , there is no video output from
the VIDEO OUT (composite) and S (S-
video) jacks.
• If you want to display video on more than
one monitor simultaneously, make sure
the player is set to
Interlace
.
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see
Easy
connections on page 11), then switch back
to
Interlace
(see below).
Switching the video output to interlace
using the front panel controls
Switch the player to standby then, using the
front panel controls, press
STANDBY/ON
while pressing to switch the player back to
Interlace
.
• DV-490V only: If the player is connected
using HDMI, disconnect the HDMI cable
before resetting the player to interlace
output. (If left connected, the HDMI output
resolution will be reset to its default—see
Resetting the output resolution to the
default setting with HDMI connection
on
page 15.)
Connecting to an AV receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
STANDBY/ON
DV-490V
DV393 KU.book Page 13 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
15
En
• The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
Note
• This unit has been designed to be
compliant with HDMI (High Definition
Multimedia Interface) . Depending on the
component you have connected, using a
DVI connection may result in unreliable
signal transfers.
• When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see
HDMI Out
on page 35, HDMI Resolution on page 36
and HDMI Color on page 36 to do this).
However, the settings for each component
are then stored in memory (for up to 2
components).
• The HDMI connection is compatible with
44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2
channel linear PCM signals, as well as
Doldy Digital, DTS and MPEG audio
bitstream.
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Resetting the output resolution to the
default setting with HDMI connection
Switch the player to standby then, using the
front panel controls, press
STANDBY/ON
while pressing to switch the player back to
480P .
STANDBY/ON
DV-490V
DV393 KU.book Page 15 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Controls and displays
03
17
En
Remote control
1 STANDBY/ON (page 18)
2 AUDIO (page 31)
3 SUBTITLE
(page 30)
4 Number buttons
(page 21)
5 TOP MENU (page 22)
6 ENTER & cursor buttons
(page 18)
7 HOME MENU
(page 18)
8 and
(page 21, 24)
9 (page 21)
10
(page 21)
11
(page 21)
12 PLAY MODE (page 27)
13 SURROUND (page 32)
14 OPEN/CLOSE
(page 20)
15 ANGLE
(page 31)
16 CLEAR (page 29)
17 ENTER (page 18)
18 MENU
(page 22)
19 RETURN
(page 18)
20 and (page 21, 24)
21 (page 21)
22
(page 21)
23 DISPLAY
(page 31)
24 ZOOM (page 31)
Using the remote control
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
• The remote has a range of about 7 m(23 ft.).
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.
• Replace the batteries when you notice a
fall off in the operating range of the remote.
1 14
15
16
17
18
19
20
21
23
2
4
5
6
7
8
10
12
13
3
9
11 22
24
DV393 KU.book Page 17 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Getting started
04
19
En
Note
• From here on in this manual, the word
‘select’ generally means use the cursor
buttons to highlight an item on-screen,
then press
ENTER .
Setting up the player for your
TV
If you have a widescreen (16:9) TV, you should
setup the player so that the picture will be
presented correctly. If you have a conventional
(4:3) TV, you can leave the player on the default
setting and move on to the next section.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Select ‘TV Screen’ from the ‘Video
Output’ settings.
3 If you have a widescreen (16:9) TV,
select ‘16:9 (Wide)’.
If you have a conventional (4:3) TV, you can
change the setting from
4:3 (Letter Box)
to
4:3
(Pan & Scan)
if you prefer. See Video Output
settings on page 35 for more details.
4 Press HOME MENU to exit the menu
screen.
Setting the language of this
player’s on-screen displays
This sets the language of the player’s on-
screen displays.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Select ‘OSD Language’ from the
‘Display’ settings.
3 Select a language.
The on-screen language will change according
to your selection.
4 Press HOME MENU to exit the menu
screen.
Digital Audio Out
Video Output
Language
Display
Options
TV Screen
Component Out
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
OSD Language
Angle Indicator
English
français
Deutsch
Italiano
Español
Initial Settings
DV393 KU.book Page 19 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Getting started
04
21
En
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in more
detail.
Resume and Last Memory
When you stop playback of a DVD, CD, or Video
CD or DivX video discs,
RESUME is shown in
the display indicating that you can resume
playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows
RESUME
and
playback resumes from the resume point. (If
you want to clear the resume point, press
(stop) while
RESUME
is displayed.)
With DVDs and Video CDs, if you take the disc
out of the player after stopping playback, the
last play position is stored in memory. If the
next disc you load is the same one, the display
shows
LAST MEM and playback will resume.
For DVD-Video discs, the player stores the play
position of the last five discs. When one of
these discs is next loaded, you can resume
playback.
Note
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
• If you don’t need the Last Memory function
when you stop a disc, you can press
OPEN/CLOSE
to stop playback and open
the disc tray.
Button What it does
Starts playback.
If the display shows
RESUME
or
LAST MEM playback starts from the
resume or last memory point (see
also
Resume and Last Memory
below.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
See also
Resume and Last Memory
below.
(remote
only)
Press to start fast reverse scanning.
Press
(play) to resume normal
playback.
(remote
only)
Press to start fast forward scanning.
Press
(play) to resume normal
playback.
Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
Skips to the next track, title or
chapter.
Numbers
(remote
only)
Use to enter a title/chapter/track
number. Press
ENTER
to select.
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track (for CD/Video CD).
• If the disc is playing, playback
jumps to the start of the selected
title (VR mode DVD-RW), chapter
(DVD-Video) or track (CD/Video CD).
DV393 KU.book Page 21 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Getting started
04
23
En
FAQ
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region for
your player. The region number should be
printed on the disc; check it against the
region number of the player (which you can
find on the rear panel). See also
DVD-Video
regions on page 42.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the disc
and look for signs of damage. See also
Taking care of your player and discs on
page 40.
• Why won’t the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and undamaged. See
Taking care of
your player and discs on page 40 for
information on cleaning discs.
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM. See
Disc / content format playback compatibility
on page 8 for more on disc compatibility.
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom of
the screen. This is not a malfunction.
• I have a standard (4:3) TV and set the player
to show widescreen DVDs in pan & scan
format, so why do I still get black bars top
and bottom with some discs?
Some discs override the display
preferences of the player, so even if you
have
4:3 (Pan & Scan)
selected, those
discs will still be shown in letter box format.
This is not a malfunction.
• I’ve connected to a HDMI compatible
component but I can’t get any signal and
the front panel HDMI indicator won’t light!
Make sure that you’ve selected this player
as the HDMI input in the settings for the
component you’re using. You may need to
refer to the instruction manual of the
component to do this. See
Connecting
using HDMI (DV-490V only) on page 14 for
more on HDMI compatibility.
• There’s no picture from the HDMI output!
This player cannot display pictures from
DVI compatible sources. See
Connecting
using HDMI (DV-490V only) on page 14 for
more on HDMI compatibility.
Make sure the resolution on this player
matches that of the component you have
connected using HDMI. See
HDMI
Resolution on page 36 to change the HDMI
resolution.
DV393 KU.book Page 23 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Playing discs
05
25
En
Frame advance/frame reverse
You can advance or back up DVD discs frame-
by-frame. With Video CDs and DivX video file
you can only use frame advance.
1 During playback, press (pause).
2 Press or to reverse or
advance a frame at a time.
3 To resume normal playback, press
(play).
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
Viewing a JPEG slideshow
After loading a CD/CD-R/RW containing JPEG
picture files, press
(play) to start a slideshow
from the first folder/picture on the disc. The
player displays the pictures in each folder in
alphabetical order.
• If the folder contains WMA/MP3 files,
playback of the slideshow and WMA/MP3
files repeats. During the audio playback,
you can still use the skip (
), scan
( ) and pause ( ) functions.
Pictures are automatically adjusted so that
they fill as much of the screen as possible (if
the aspect ratio of the picture is different to
your TV screen you may notice black bars at the
sides, or at the top and bottom of the screen).
While the slideshow is running:
Note
• The time it takes for the player to load a file
increases with large file sizes.
Browsing DVD or Video CD disc
with the Disc Navigator
Use the Disc Navigator to browse through the
contents of a DVD or Video CD disc to find the
part you want to play.
Important
• You can’t use the Disc Navigator with
Video CDs in PBC mode.
1 During playback, press HOME MENU
and select ‘Disc Navigator’ from the on-
screen menu.
Button What it does
Pauses the slideshow; press again to
restart.
Displays the previous picture.
Displays the next picture.
Pauses the slideshow and rotates the
displayed picture 90º (counter)
clockwise. (Press
(play) to restart
slideshow.)
Pauses the slideshow and flips the
displayed picture horizontally or
vertically. (Press
(play) to restart
slideshow.)
ZOOM
Pauses the slideshow and zooms the
picture. Press again to toggle
between 1x, 2x and 4x zoom. (Press
(play) to restart slideshow.)
MENU
Displays the Disc Navigator screen
(see below).
Button What it does
DV393 KU.book Page 25 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Playing discs
05
27
En
• When a JPEG file is highlighted, a
thumbnail image is displayed on the right.
3 To play the highlighted track or DivX
video file or display the highlighted JPEG
file, press ENTER.
• When a WMA/MP3 or DivX video file is
selected, playback begins, starting with the
selected file, and continues until the end of
the folder.
• When a JPEG file is selected, a slideshow
begins, starting with that file, and
continues to the end of the folder.
Tip
• You can also play a JPEG slideshow while
listening to WMA/MP3 playback. Simply
select the audio file you want to listen to
followed by the JPEG from which you want
the slideshow to start. Playback of both the
slideshow and the audio files repeats.
Playback controls are effective for the
JPEG slideshow only.
• To play the contents of the whole disc
rather than just the current folder, exit the
Disc Navigator and start playback using
the
(play) button.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD, Video
CD) or title (DVD) that form a loop which is
played over and over.
• You can’t use A-B Repeat with Video CDs in
PBC mode, or WMA/MP3/DivX video files.
1 During playback, press PLAY MODE and
select ‘A-B Repeat’ from the list of
functions on the left.
2 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
3 Press ENTER on ‘B(End Point)’ to set the
loop end point.
After pressing
ENTER
, playback jumps back to
the start point and plays the loop.
4 To resume normal playback, select ‘Off’
from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see
Creating a program list on
page 29).
Important
• You can’t use Repeat play with Video CDs
in PBC mode, or with WMA/MP3 discs.
• You can’t use repeat and random play at
the same time.
File1
File2
File3
File4
File5
Folder 2
00:00/ 00:00 0kbps
DV393 KU.book Page 27 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Playing discs
05
29
En
• For CDs and Video CDs, select
On
or
Off
to
switch random play on or off.
Tip
• Use the following controls during random
play:
Creating a program list
This feature lets you program the play order of
titles/chapters/tracks on a disc.
Important
• You can’t use Program play with VR format
DVD-RW discs, Video CDs playing in PBC
mode, WMA/MP3 discs, DivX video discs,
or while a DVD disc menu is being
displayed.
1 Press PLAY MODE and select ‘Program’
from the list of functions on the left.
2 Select ‘Create/Edit’ from the list of
program options.
3 Use the cursor buttons and ENTER to
select a title, chapter or track for the
current step in the program list.
For a DVD disc, you can add a title or a chapter
to the program list.
• For a CD or Video CD, select a track to add
to the program list.
After pressing ENTER to select the title/
chapter/track, the step number automatically
moves down one.
4 Repeat step 3 to build up a program list.
A program list can contain up to 24 titles/
chapters/tracks.
• You can insert steps into the middle of a
program list by just highlighting the
position where you want the new step to
appear and entering a title/chapter/track
number.
• To delete a step, highlight it and press
CLEAR .
5 To play the program list, press (play).
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off the
player.
Button What it does
Selects a new track/title/chapter
at random.
Returns to the beginning of the
current track/title/chapter;
further presses select another
random track/title/chapter.
Create/Edit
Playback Start
Playback Stop
Program Delete
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
DV393 KU.book Page 29 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Playing discs
05
31
En
Switching audio language/
channels
When playing a DVD and DivX video disc
recorded with dialog in two or more languages,
you can switch audio language during
playback.
When playing a VR format DVD-RW disc
recorded with dual-mono audio, you can
switch between the main, sub, and mixed
channels during playback.
When playing a Video CD, you can switch
between stereo, just the left channel or just the
right channel.
1 Press AUDIO repeatedly to select an
audio language/channel option.
The language/channel information is shown
on-screen.
Note
• Some DVD discs only allow you to change
audio language from the disc menu. Press
TOP MENU
or
MENU
to access.
• To set DVD audio language preferences,
see Language settings on page 36.
Zooming the screen
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while
watching a DVD, DivX video title or Video CD or
playing a JPEG disc.
1 During playback, use the ZOOM button
to select the zoom factor (Normal, 2x or
4x).
• Since DVD, Video CD, DivX video title and
JPEG pictures have a fixed resolution,
picture quality will deteriorate, especially at
4x zoom. This is not a malfunction.
2 Use the cursor buttons to change the
zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
• If the navigation square at the top of the
screen disappears, press ZOOM again to
display it.
Switching camera angles
Some DVD discs feature scenes shot from two
or more angles—check the disc box for details.
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see
Display settings
on page 37).
1 During playback (or when paused),
press ANGLE to switch angle.
Displaying disc information
Various track, chapter and title information,
such as the elapsed and remaining playing
time can be displayed on-screen while a disc is
playing.
1 To show/switch/hide the information
displayed, press DISPLAY repeatedly.
• When a disc is playing, the information
appears at the top of the screen. Keep
pressing
DISPLAY
to change the displayed
information.
DV393 KU.book Page 31 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Audio Settings and Video Adjust menus
06
33
En
• If the player is outputting Dolby Digital,
DTS or MPEG bitstream audio (in other
words, no conversion to PCM), Virtual
Surround has no effect on the audio from
the digital output. See
Digital Audio Out
settings on page 34 for how to set up the
digital output formats.
• How good the surround effect is varies with
the disc.
Dialog
• Settings: High , Medium , Low , Off
(default)
The Dialog feature is designed to make the
dialog stand out from other background
sounds in the soundtrack.
Equalizer
• Settings:
Rock
,
Pop
,
Live
,
Dance
,
Techno
,
Classic
,
Soft
,
Off
(default)
The various preset EQ curves are designed to
suit various styles of music.
Note
• 96 kHz linear PCM audio is automatically
downsampled to 48 kHz if the Equalizer is
switched on.
Video Adjust menu
From the Video Adjust screen you can adjust
various settings that affect how the picture is
presented.
1 Press HOME MENU and select ‘Video
Adjust’ from the on-screen display.
2 Make settings using the
(cursor) buttons, and ENTER.
You can adjust the following picture quality
settings:
• Sharpness – Adjusts the sharpness of
edges in the picture ( Fine , Standard
(default) , Soft ).
•
Brightness
– Adjusts the overall
brightness (
–20
to
+20
).
• Contrast – Adjusts the contrast between
light and dark ( –16 to +16 ).
•
Gamma
– Adjusts the ‘warmth’ of the
picture (
High
,
Medium
,
Low
,
Off
(default) ).
• Hue – Adjusts the red/green balance
( Green 9 to Red 9 ).
•
Chroma Level
– Adjusts how saturated
colors appear (
–9
to
+9
).
Adjust the Brightness, Contrast, Hue and
Chroma Level settings using the
(cursor
left/right) buttons.
3 Press ENTER to return to the Video
Adjust screen, or HOME MENU to exit.
Sharpness
Brightness
Contrast
Gamma
Hue
Chroma Level
Standard
0
0
Off
0
0
Video Adjust
Brightness min max
0
DV393 KU.book Page 33 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Initial Settings menu
07
35
En
Video Output settings
DTS Out DTS
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
Off No digital audio is output when playing a DTS disc.
96 kHz PCM Out 96kHz > 48kHz
96 kHz digital audio is converted to 48 kHz for digital output.
96kHz 96 kHz digital audio is output as is at 96 kHz.
MPEG Out MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG
MPEG encoded digital audio is output as is.
HDMI Out*
* DV-490V only.
LPCM (2 ch)
Set if your monitor or device only accepts stereo input. On this
setting multichannel audio is downmixed to 2 channels for
stereo linear PCM output. (In case of DTS source, the HDMI
audio output is turned off.)
Auto Dolby Digital, DTS and MPEG sources are processed
according to how they were encoded, but if your amplifire/
monitor is not compatible with DTS audio, DTS audio output
from HDMI is turned off. Linear PCM sources are heard as is.
Off No digital audio output.
Setting Option What it means
TV Screen
(This setting effective for
analog and HDMI video
output. See also
Screen
sizes and disc formats
on page 41.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
Component Out Interlace
Set if your TV is not compatible with progressive scan video.
Progressive Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also
Switching
the video output to interlace using the front panel controls on
page 13.
Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite and S-video jacks when this setting is selected.
Setting Option What it means
DV393 KU.book Page 35 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Initial Settings menu
07
37
En
Display settings
Options settings
Setting Option What it means
OSD Language English
On-screen displays of the player are in English.
Languages as displayed On-screen displays are shown in the language selected.
Angle Indicator On
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
Off No multi-angle indication is shown.
Setting Option What it means
Parental Lock –
See Parental Lock on page 38.
DivX VOD Display
See About DivX® VOD content on page 39.
DV393 KU.book Page 37 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Initial Settings menu
07
39
En
The new Country/Area code is set and you will
return to the Options menu screen. Note that
the new Country/Area code doesn’t take effect
until the next disc is loaded (or the current disc
is reloaded).
About DivX
®
VOD content
In order to play DivX VOD (video on demand)
content on this player, you first need to register
the player with your DivX VOD content
provider. You do this by generating a DivX VOD
registration code, which you submit to your
provider.
Important
• DivX VOD content is protected by a DRM
(Digital Rights Management) system. This
restricts playback of content to specific,
registered devices.
• If you load a disc that contains DivX VOD
content not authorized for your player, the
message
Authorization Error
is displayed
and the content will not play.
• Resetting the player (as described in
Resetting the player on page 42) will not
cause you to lose your registration code.
Displaying your DivX VOD
registration code
1 Press HOME MENU and select ‘Initial
Settings’.
2 Select ‘Options’, then ‘DivX VOD’.
3 Select ‘Display’.
Your 8-digit registration code is displayed.
Make a note of the code as you will need it
when you register with a DivX VOD provider.
Playing DivX
®
VOD content
Some DivX VOD content may only be playable
a fixed number of times. When you load a disc
containing this type of DivX VOD content, the
remaining number of plays is shown on-screen
and you then have the option of playing the
disc (thereby using up one of the remaining
plays), or stopping. If you load a disc that
contains expired DivX VOD content (for
example, content that has zero remaining
plays), the message
Rental Expired
is
displayed.
If your DivX VOD content allows an unlimited
number of plays, then you may load the disc
into your player and play the content as often
as you like, and no message will be displayed.
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock
DivX VOD
Display
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Initial Settings
DivX (R) Video On Demand
0 1 2 3 4 5 6 7
Your registration code is:
To learn more visit www.divx.com/vod
Done
DV393 KU.book Page 39 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Additional information
08
41
En
If you use a chemical-impregnated cleaning
cloth, read the instructions carefully before
use. These cloths may leave smear marks on
half-mirror finish surfaces; if this happens,
finish with a dry cloth.
Cleaning the pickup lens
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer-authorized service center. We
do not recommend using commercially
available lens cleaners for CD players.
Condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair its
performance. Leave it to adjust to the warmer
temperature for about an hour before
switching on.
Moving the player
If you need to move the player, first press
STANDBY/ON
on the front panel to turn the
player off. Wait for
-OFF-
to disappear from the
display, then unplug the power cable. Never lift
or move the unit during playback—discs rotate
at a high speed and may be damaged.
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspect ratios, ranging from TV
programs, which are generally 4:3, to
CinemaScope widescreen movies, with an
aspect ratio of up to about 7:3.
Televisions, too, come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen
setting (page 35) of this player should be set to
16:9 (Wide) .
When you watch discs recorded in 4:3 format,
you can use the TV controls to select how the
picture is presented. Your TV may offer various
zoom and stretch options; see the instructions
that came with your TV for details.
Please note that some movie aspect ratios are
wider than 16:9, so even though you have a
widescreen TV, these discs will still play in a
‘letter box’ style with black bars at the top and
bottom of the screen.
Standard TV users
If you have a standard TV, the TV Screen
setting (page 35) of this player should be set to
4:3 (Letter Box)
or
4:3 (Pan&Scan)
,
depending on which you prefer.
Set to
4:3 (Letter Box)
, widescreen discs are
shown with black bars top and bottom.
Set to 4:3 (Pan&Scan) , widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Please note that many widescreen discs
override the player’s settings so that the disc is
shown in letter box format regardless of the
setting.
DV393 KU.book Page 41 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Additional information
08
43
En
HDMI troubleshooting (DV-490V)
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Inspect the other components and electrical appliances being used. If the
trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized
service center or your dealer to carry out repair work.
Problem Remedy
No HDMI audio output. • This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
No HDMI video output • Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See
HDMI Resolution
on page 36 to change the HDMI resolution. See Resetting the output
resolution to the default setting with HDMI connection on page 15 if
you want to reset the output resolution.
No multichannel HDMI
audio. • Make sure the
HDMI Out
setting is set to
Auto
(see HDMI Out on
page 35 to do this).
DV393 KU.book Page 43 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Additional information
08
45
En
*1
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
*2
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
*3
“DTS” and “DTS Digital Out” are registered
trademarks of Digital Theater Systems, Inc.
*4
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
MP3 MP3 (MPEG1 audio layer 3) is a
compressed stereo audio file format.
Files are recognized by their file
extension “.mp3”.
MPEG audio An audio format used on Video CDs and
some DVD discs.
PBC
(PlayBack
Control) A system of navigating a Video CD
through on-screen menus recorded
onto the disc.
PCM
(Pulse Code
Modulation) Digital audio encoding system found on
CDs. Good quality, but requires a lot of
data compared to Dolby Digital, DTS
and MPEG encoded audio. See also
Digital audio .
Progressive
scan video All the lines that make up a video
picture are updated in one pass
(compared to interlace which takes two
passes to update the whole picture).
Regions
These associate DVD-Video discs and
players with particular areas of the
world. See
DVD-Video regions on
page 42 for more information.
Sampling
frequency
The rate at which sound is measured to
be turned into digital audio data. The
higher the rate, the better the sound
quality. CD is 44.1 kHz; DVD can be up
to 96 kHz. See also
Digital audio .
WMA
WMA is short for Windows Media Audio
and refers to an audio compression
technology developed by Microsoft
Corporation. Files are recognized by
their file extension “.wma”.
Microsoft, Windows Media, and the
Windows logo are trademarks, or
registered trademarks of Microsoft
Corporation in the United States and/or
other countries.
DV393 KU.book Page 45 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Additional information
08
47
En
Specifications
General
System . . . . . . . . . . . . . . . . . . . . . . . . DVD player
Power requirements . . . . . . . . . .AC 120 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . .7 W
Power consumption (standby) . . . . . . . . . 0.5 W
Weight . . . . . . . . . . . . . . . . . . . . . . . . 1.8 kg / 4 lb
Dimensions:
. . . . . . 420 mm (W) x 49.5 mm (H) x 214 mm (D)
(16-9/16 in. (W) x 1-15/16 in. (H) x 8-7/16 in. (D))
Operating temperature . . . . . . +5 °C to +35 °C
(+41 °F to +95 °F)
Operating humidity . . . . . . . . . . . . . . 5 % to 85 %
(no condensation)
Component video output
Y (luminance) - Output level . . . . . . 1 Vp-p (75 )
P
B
(color) - Output level . . . . . . . 0.7 Vp-p (75 )
P
R
(color) - Output level . . . . . . . 0.7 Vp-p (75 )
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
Video output
Output level . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 )
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
Audio output (1 stereo pair)
Output level . . . . . . . . . . . . .During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels . . . . . . . . . . . . . . . . . . . . . . 2
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
HDMI output (DV-490V)
HDMI output . . . . . . . . . . . . . . . . . . . . . . . . 19 pin
Digital audio characteristics
Frequency response . . . . . . . . . . 4 Hz to 44 kHz
(DVD fs: 96 kHz)
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .115 dB
Dynamic range . . . . . . . . . . . . . . . . . . . . . . .88 dB
Total harmonic distortion. . . . . . . . . . . . 0.0065 %
Wow and flutter . . . . . . . .Limit of measurement
(±0.001 % W. PEAK) or lower
Digital output
Coaxial digital output . . . . . . . . . . . . . . .RCA jack
Accessories
Audio/video cable . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . 2
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating Instructions
The specifications and design of this product are subject to
change without notice, due to improvement.
Published by Pioneer Corporation.
Copyright © 2006 Pioneer Corporation.
All rights reserved.
DV393 KU.book Page 47 Thursday, March 16, 2006 1:17 PM
Downloaded From DvDPlayer-Manual.com Pioneer Manuals