Pioneer CRD3664 Скачать руководство пользователя страница 49

Страница: 49 / 68

DEH-5/XU/UC

How to hold the Mechanical Unit

1. Hold the top and bottom frame.
2. Do not squeeze top frame's front portion too tight,

because it is fragile.

Removing the Upper and Lower Frames

1. With a disc clamped, remove the four springs (A),

the two springs (B), the two springs (C), and the

four

screws.

2. To remove the upper frame, open it on the fulcrum
A.
3. While lifting the carriage mechanism, remove the
three

dampers.

4. With the frames removed, insert the connectors

coming from the main unit and eject the disc.

Caution: Before installing the carriage mechanism in

the frames, be sure to apply some alcohol to the

dampers and set the mechanism to the clamp mode.

Removing the Guide Arm Assy

1. Remove the upper and lower frames and set the

mechanism to the clamp mode.

2. Remove the two springs.
3. Remove the two screws and bevel gear bracket.

Note that the gears come off.

4. Slide the guide arm Assy in the direction marked

with the arrow (1) and open it upwards.

5. At the angle of about 45 degrees, slide the guide

arm Assy in the direction marked with the arrow

(3) to remove it.

Do not squeeze.

Lower Frame

Guide Arm Assy

Spring

Damper

Carriage Mechanism

Damper

Upper Frame

Содержание CRD3664





































































Результаты поиска

Содержание CRD3664

Отзывы:

Похожие инструкции для CRD3664

Бренды по названию

Популярные бренды

Pioneer CRD3664, Руководство по обслуживанию

Результаты поиска

Содержание CRD3664

Отзывы:

Похожие инструкции для CRD3664

Бренды по названию

Популярные бренды