11
Messages and How to React to Them (Additional Messages)
The following messages are added to those of AVIC-X1R:
Message
When
What to do
This area does not contain any POI’s
of the selected type.
Vicinity Search
cannot be per-
formed because the searched loca-
tion is in areas not stored on the DVD
Map Disc.
Replace the DVD Map Disc and per-
form the
Vicinity Search
again.
Only City Centre can be searched.
If
POI Search
was performed on
areas not stored on the DVD Map
Disc.
Only the City Center can be
searched. If you want to search other
categories in areas not stored on the
disc, replace the DVD Map Disc and
perform the
POI Search
again.
Set the areas stored on the DVD Map
Disc to destination or way points.
This country is not available on the
disc. Please insert an appropriate
disc.
When areas not stored on the DVD
Map Disc are included in the search.
Set the destination or way points in
the areas stored on the DVD Map
Disc, or replace the DVD Map Disc
and perform the search again.
Failed to make the route profile.
Failed to generate the route profile
because the set route passes
through areas not stored on the DVD
Map Disc.
Insert the DVD Map Disc and retry.
No route data can be stored. You
should insert the disc that contains
the map data of the current position.
In case the area to be set for “
Map In
Memory
” is areas not stored on the
DVD Map Disc.
• Cange the memory area to be set to
the areas stored on the DVD Map
Disc.
• Insert the DVD Map Disc contain-
ing that area.
• Scaling down.
• Scaling up.
In the memory navi mode, if the DVD
Map Disc is inserted without chang-
ing the scale (only when the point is
stored on the DVD Map Disc).
The scale automatically returns to
the one that was set in the DVD navi
mode before being changed to the
memory navi mode.
• No map data available on this
scale. Scaling up.
• No map data available on this
scale. Scaling down.
When the scale that had been previ-
ously displayed cannot be displayed
for the following reasons:
• The disc was ejected and the sys-
tem was changed to the memory
navi mode.
• In the memory navi mode, the map
was scrolled to outside the memory
area. Or the vehicle moved outside
of the memory area.
• The map was scrolled to areas not
stored on the DVD Map Disc. Or
the vehicle moved to areas not
stored on the disc.
• The map was scrolled from areas
not stored on the disc to the mem-
ory areas. Or, the vehicle moved
from areas not stored on the disc to
the memory area.
If the desired scale cannot be
selected, insert the DVD Map Disc
and then change the scale.
Failure in the memory recovery proc-
ess. Memory navigation is presently
not possible.
Failed to complete the recovery of the
memory area because the disc could
not be read for some reason, result-
ing in deletion of the memory.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
This function is not available with the
current map disc.
In case the current position is areas
not stored on the DVD Map Disc and
an attempt was made to zoom in to
make the scale 500 m or more.
Zoom in again after the vehicle
moves into an area stored on the
DVD Map Disc.
Or, replace the DVD Map Disc and
try to zoom in again.
MAN-CNDV-60M-EN.fm Page 11 Wednesday, April 5, 2006 2:02 PM
