55
CDX-P2050VC,P2050VN,P2050VS
-
Removing the Pickup Unit
1. Insert a short pin into the pickup flexible PCB.
2. Remove the pickup flexible PCB from the connector.
3. Remove the flexible card from the connector.
4. Remove the lead wires of the spindle motor assy and carriage motor assy by removing solder.
5. Loosen the two screws. Lift up the relay PCB as shown in Fig. 9.
Be careful not to excessively pull the tray motor flexible PCB and the relay flexible PCB.
6. Remove screws A and then remove the carriage motor assy, lighting conductor, feed screw holder, feed screw and
belt (see Fig. 10).
7. Remove screw B on the main side and the pickup unit together with the guide shaft (see Fig. 10).
Fig.9
Flexible card
Erect
Flexible PCB (handle
with care)
Tray motor flexible
PCB (handle with
care)
Short Pin
Relay PCB
Screw A
Motor bracket
CRG motor
Screw A
Feed screw holder
Feed screw
Guide shaft (main)
Guide shaft (sub)
Belt
Screw B
Pickup unit
Fig.10
Lighting conductor
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
