manualshive.com logo in svg

Pioneer CDX-FM657, Руководство по обслуживанию

Поделиться
Скачать
Pioneer CDX-FM657 Скачать руководство пользователя страница 3

3

CDX-FM657

1. SAFETY INFORMATION

1.1 CDX-FM657/X1N/UC

CAUTION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so
and refer the repair to a qualified service technician.

WARNING

This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of

California to cause cancer, birth defects or other reproductive harm. 

Health & Safety Code Section 25249.6 - Proposition 65

1.2 CDX-FM657/X1N/EW

1. Safety Precautions for those who Service this Unit.
• Follow the adjustment steps (see pages 38 through 44)in the service manual when servicing this unit. When check-

ing or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results.

Caution: 

1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.

2. A “CLASS 1 LASER PRODUCT” label is affixed to the

rear of the player.

3. The triangular label is attached to the mechanism

unit frame.

4. Specifications of Laser Diode

Specifications of laser radiation fields to which human access is possible during service.
Wavelength

=

800 nanometers

Содержание CDX-FM657

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды