Installation manual SPH-EVO82DAB-208 | Version 1.0
The command keys, which are used to enter,
navigate and exit the menu, are:
1. IGNITION key
2. Tire pressure reset button
3. Preset up / down rotary button
4. Volume up / down rotary button
5. Source button
How to enter and exit the menu
Entering the menu:
Turn on the dashboard by turning the key one step while holding down
the tire pressure reset button.
The buzzer will emit four long beeps.
During this procedure, the radio will remain switched off.
Exiting the menu:
Turn off the dashboard by turning the key back.
The buzzer will emit four short beeps.
How to navigate in the menu:
As soon as the menu procedure is activated, it is possible to browse
through the settings with the PRESET DOWN and PRESET UP buttons
(setting list shown below). Each time the button is rotated, the buzzer will
indicate the setting number by beeps. Please note that one long tone
corresponds to five short ones.
It’s recommended to familiarize with these functions to recognize the
different type of beeps before proceeding with the settings. Different
settings, which were available on the car through menus on the original
radio, are kept accessible via a setup menu. The menu can heard via the
buzzer and controlled with the mentioned command keys.
The retained settings are the following ones:
- Setting N° 1, FUEL CONSUMPTION/DISTANCE.
- Setting N° 2, FOLLOW-ME-HOME LIGHTING.
- Setting N° 3, WELCOME LIGHTING.
- Setting N° 4, REAR WIPER IN REVERSE.
- Setting N° 5, ACTIVE SAFETY BRAKE.
- Setting N° 6, DRL (Daytime running lights) settings.
- Setting N° 7, DIRECTIONAL HEADLIGHTS.
Each time one of the keys is pressed, the buzzer indicates the selected
option:
1) Fuel consumption / distance
To choose the unit of measurement use the |<< VOLUME UP/ VOLUME
DOWN>>|rotary button to scroll through the options (VOLUME DOWN to
scroll down and VOLUME UP to scroll up):
- Option 1: L/Km, one short beep.
- Option 2: Km/L, two short beeps.
- Option 3: mpg, three short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
2) FOLLOW-ME-HOME LIGHTING
To define the follow-me-home light options use the <<VOLUME UP/
VOLUME DOWN>> rotary button to scroll through the options (VOLUME
DOWN to scroll down and VOLUME UP to scroll up):
- Option 1: lights off, one short beep.
- Option 2: lights on for 15”, two short beeps.
- Option 3: lights on for 30”, three short beeps.
- Option 4: lights on for 60”, four short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
3) Welcome lighting
To define the welcome light options use the <<VOLUME UP/VOLUME
DOWN>> rotary button to scroll through the options (VOLUME DOWN to
scroll down and VOLUME UP to scroll up):
- Option 1: welcome light off, one short beep.
- Option 2: welcome light on for 15”, two short beeps.
- Option 3: welcome light on for 30”, three short beeps.
- Option 4: welcome light on for 60”, four short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
4) Rear wiper in reverse
To define the rear wiper functions use the <<VOLUME UP/VOLUME
DOWN>> rotary button to scroll through the options (VOLUME DOWN to
scroll down and VOLUME UP to scroll up):
- Option 1: rear wiper automatic functioning in reverse condition OFF,
one short beep.
- Option 2: rear wiper automatic functioning reverse condition ON, two
short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
5) Active safety brake
To define the active safety brake functions use the <<VOLUME UP/
VOLUME DOWN>> rotary button to scroll through the options (VOLUME
DOWN to scroll down and VOLUME UP to scroll up):
- Option 1: active safety brake function OFF, one short beep.
- Option 2: active safety brake function ON, two short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
6) DRL (Daytime Running Lights)
To define the DRL functions use the <<VOLUME UP/VOLUME DOWN>>
rotary button to scroll through the options (VOLUME DOWN to scroll
down and VOLUME UP to scroll up):
- Option 1: DRL function OFF, one short beep.
- Option 2: DRL function ON, two short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
7) Directional headlights
To define the directional light functions use the <<VOLUME UP/VOLUME
DOWN>> rotary button to scroll through the options (VOLUME DOWN to
scroll down and VOLUME UP to scroll up):
- Option 1: directional light function OFF, one short beep.
- Option 2: directional light function ON, two short beeps.
To confirm the option and save it to the vehicle, press the SOURCE
button: A two-tone beep indicates that the option has been saved.
Menu Settings for NAC radio only
