Installation manual CA-HM-UNI-EVO.006 | Version 1.0
Slide the metal cage into the vehicle with the opening on top
Put the screen holder on and fix only the top two screws
Close the locking tabs and secure with the necessary screws
Click the plastic tabs onto the metal holder as shown (L+R)
Whilst sliding the silver box in the car pull the display cable
through using some tape and extension cable CD-RGB150E
(not included)
install the metal holder - you can adjust height and angle
by using different positions
Put the DIN cover over the unit
By using the two top screws, mount the screen holder
to the screen
5
11
6
12
8
10
7
9
