Pioneer BDR-XD07S, Руководство по эксплуатации

Страница: 11 / 40

11
En
En
glish
Operations
The unit writes to disc when the supplied software application is installed on your PC. Writing fails if the
PC or operating system does not support the software.
Begin writing to disc
1 Connect the supplied USB cable.
2 Turn on the PC.
3 Press the OPEN button, and gently lift the disc cover by hand.
* If this device is connected to Mac, you will not be able to use this function due to the specifications
of macOS.
4 Place the disc in the tray with the label facing up.
5 Close the disc cover gently.
6 Start the disc burning application.
End the writing session
1 Quit the disc burning application.
2 Press the OPEN button, and gently lift the disc cover by hand.
* If this device is connected to Mac, you will not be able to use this function due to the specifications
of macOS.
3 Remove the disc.
4 Close the disc cover gently.
5 Shut down the PC.
• When the lock mechanism is released, the disc cover needs to be fully opened in order to close again.
Manual disc cover open
Use the Forced Open Lever to remove discs if the disc cover fails to open and all other methods have
been exhausted.
1 Shut down the PC.
2 Wait for the disc to stop spinning.
3 Slide the Forced Open Lever to open the disc cover.
4 Gently open the disc cover and remove the disc.
Warning
To prevent injury and damage to the unit, do NOT force the disc cover to
open while the disc is spinning.
BDR-XD07S.book 11 ページ ２０１９年８月２０日 火曜日 午前９時５分