6
En
Safety instructions
To ensure your personal safety and to maximize the full operating potential of your unit, read and follow
these safety instructions.
Read & Retain Instructions
– Read all operating and user information provided with this drive.
Cleaning
– Use a damp cloth to clean the exterior housing. Avoid using any fluids including liquid,
aerosol or alcohol-based cleaning products.
Water or Moisture
– Avoid operating or locating this drive near water or other sources of fluid.
Accessories
– Do not place this product on an unstable cart, stand, or table. The product may fall and
be seriously damaged.
Operation
– Avoid moving, lifting or reorienting this drive while a disc is rotating inside.
Environment
– Avoid installing this drive in a location with exposure to large quantities of dust, high
temperatures, high humidity, or subject to excessive vibrations or shocks.
Power Sources
– Operate this drive only from the attached power sources.
Power-Cord Protection
– When unplugging the unit, pull on the plug – not on the cord. Do not handle
the cord or plug with wet hands; doing so could cause an electric short or shock. Do not allow anything
to pinch or rest on the power cord and do not place in a walkway.
Overloading
–
Do not overload wall outlets and extension cords. Doing so may result in fire or electric
shock.
Object & Liquid Entry
– Never push inappropriate objects into the device. Avoid spilling any liquids into
or on the outside of the drive.
Condensation
– Moisture can form in the operating section of the product if the drive is taken from cool
surroundings to a room with a warmer temperature. Let the drive stand for one to two hours in the new
location before turning it ON.
Servicing
– Opening or removing the cover exposes you to possible electrical shock or other danger.
Contact a Pioneer authorized service representative for repairing this drive (refer to the enclosed Service
& Support Card).
Damage Requiring Service
– Unplug the unit and refer servicing to qualified service personnel in the
following situations:
• When the power cord, plug, or chassis is damaged.
• If liquid has been spilled.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage and can require extensive work by a qualified technician to restore
the unit to its normal operation.
• When the product exhibits a distinct change in performance – this indicates a need for service.
BDR-X12UBK_ORC8299-A.book 6 ページ ２０１９年１１月２７日 水曜日 午後４時３３分
