BDP-95FD
27
5
7
8
5
6
7
8
C
D
F
A
B
E
6. SERVICE MODE
6.1 SERVICE KEY INPUT
How to enter each check mode
Each check mode descri
b
ed in this specification can
b
e entered e
v
en during
N
ormal Operation mode or for CA check,
b
y using the remote control unit for ser
v
icing.
Key names enclosed in quotation marks (" ") are those on the remote control unit for ser
v
icing.
Specifications of the ESC code
When the "ESC" key is pressed, ESCAPE mode is entered, and the next keypress will ha
v
e a special meaning.
If any key other than the ones indicated in the a
b
o
v
e ta
b
le is the first one pressed after the "ESC" key, ESCAPE
mode is canceled.
"ESC" key repeat is ignored, and ESCAPE mode is maintained.
No.
Command Name
Key Input
Operation/Usa
g
e
Remarks
1
Settings at shipment
Press "ESC" then
"CLEAR."
For restoring the settings at shipment (The unit will not
b
e turned
off.)
Special condition for entering the mode: The unit must not
b
e in Play
b
ack mode.
This check mode for settings at shipment (the unit will
b
e
turned off) is the same as that entered
b
y simultaneously
pressing the STOP and POWER keys on the main unit.
2
Error-Rate Measurement
mode 1 (with judgment)
Press "ESC" then
"SIDE B."
After automatic error-rate measuring, the results are displayed.
3
Search mode
Press "ESC" then "+10."
Switching the numeric-key search from Chapter Search to Title
Search during play
b
ack of BD-ROM or D
V
D-
V
ideo discs.
4
Checking of the keys on
the main unit
Press "ESC" then
"SIDE A."
When a key on the main unit or the remote control unit is
pressed, the corresponding key code is displayed on the FL
display. If check results of pressing all the keys on the main unit
(the order of keypresses can
b
e random) are "OK," all the
segments on the FL display light.
Keypresses can
b
e in no particular order. After all the keys
on the main unit are pressed, all the segments on the FL
display light. Until that, the corresponding key code is
displayed when any key is pressed.
5
Switching of the settings
for OUTPUT FORMAT
Press "ESC" then "
8
."
The same operation as that when setting the Component output
to 4
8
0i.
The initial setting is Auto.
Press "ESC" then
"T
V
/LDP."
The same operation as that when setting the Component output
to 4
8
0p.
Press "ESC" then "1."
The same operation as that when setting the Component output
to 10
8
0i.
Press "ESC" then "CX."
The same operation as that when setting the Component output
to 10
8
0p.
6
Indications for Ser
v
icing
Press "ESC" then "DISP." For details on operations after key inputs, see the sheet "6.2
Screen indication for Ser
v
ice."
7
CPRM ID Registration
mode
Press "ESC" then
"STEREO."
Enter the specific ID num
b
er for the CPRM and HDCP (and
DTCP) keys and the MAC address.
For details, see "
8
.3 CPRM ID num
b
er and Data setting."
8
Model Identification mode
Press "ESC" then
"DIG/A
N
A."
For confirmation of the destination and
v
ersion num
b
er of the
model.
For production use.
9
On-Screen Display output
Press "ESC," "SEARCH,"
then "6," in that order.
For setting the On-Screen Display output to O
N
.
Use to stop the On-Screen Display output.
Press "ESC," "SEARCH,"
then "7," in that order.
For setting the On-Screen Display output to OFF.
10
Audio muting at the last
stage of output
Press "ESC" then "9."
For forci
b
ly muting the audio output.
Press "ESC" then "0."
For forci
b
ly canceling audio muting
11
Switching of the LED
display
Press "ESC" then
"REPEAT A."
All the segments on the LED display are lit.
Press "ESC" then
"REPEAT B."
All the segments on the LED display go dark.
12
Switching of the AUDIO
MULTI output
Press "ESC" then
"CHAP."
For setting the AUDIO MULTI output to All Channel Output mode
Switch T
V
ASPECT ratio in
V
ideo out to 4 : 3 (Standard).
The intitial setting is 16 : 9 (Widescreen).
Error-Rate Measurement
mode 2 (for continuous
play
Press "ESC," "DISP,"
then "2," in that order.
After automatic error-rate measuring, the result is displayed as
an OSD.
Special condition for entering the mode: The unit must
b
e
in Play
b
ack mode.
For details, see "6.3 How to measure the error rate."
For details, refer to "6.3 How to measure the error rate."
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
