Pioneer BDP-3220K, Руководство по эксплуатации

Страница: 43 / 96

43
En
08
Control function
Network

is displayed in file names,
etc.
The characters that cannot be displayed on this player are displayed in

.
A message indicating low
memory appears while
playing a BD-ROM disc.
• Connect a USB device (page 16).
• Erase the data stored on the connected USB device from
BUDA
Setup
(page 34).
Problem Check Remedy
Control function does not
work. Is the HDMI cable properly
connected? To use the Control function, connect the Flat Screen TV and AV system
(AV receiver or amplifier, etc.) to the
HDMI OUT
terminal (page 13).
Is the HDMI cable you are
using a High Speed HDMI
®
/
TM
Cable?
Use a High Speed HDMI
®
/
TM
Cable. The Control function may not work
properly if an HDMI cable other than a High Speed HDMI
®
/
TM
Cable is
used.
Is this player connected to
the TV using an HDMI cable
to watch the picture? If video signals are being output from a terminal other than the
HDMI
OUT
terminal, the Control function does not work. Connect to the TV
using an HDMI cable (page 13).
Is
Control
set to
On
on the
player?
Set
Control
to
On
on the player (page 31).
Does the connected device
support the Control function? • The Control function will not work with devices of other brands that
do not support the Control function, even when connected using an
HDMI cable.
• The Control function will not work if devices that do not support the
Control function are connected between the Control-compatible device
and the player.
• See page 13.
• Even when connected to a Pioneer product compatible with the
Control function, some of the functions may not work.
Also refer to the operating instructions for the connected device.
Is Control set to On on the
connected device?
Set Control to On on the connected device. The Control function
operates when Control is set to On for all devices connected to the
HDMI OUT
terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player’s picture is output to the Flat Screen TV. (Also,
check after changing the connected devices and connecting and/or
disconnecting HDMI cables.) If the player’s picture is not being output
to the Flat Screen TV, the Control function may not work properly.
For details, refer to the operating instructions of the connected device.
Are multiple players
connected? The Control function may not work if three or more players, including
this player, are connected by an HDMI cable.
Problem Check Remedy
• BD-LIVE function
(connection to the Internet)
cannot be used.
• “No valid id file found!” is
displayed when I try to update
the software. Perform
Connection Test
(page 34). If “Networks is OK.” is displayed,
check the proxy server settings (page 33). Also, there may be a problem
with the Internet connection. Contact your Internet service provider.
Software updating is slow. Depending on the Internet connection and other conditions, some time
may be required to update the software.
Problem Check Remedy
BDP-3220K_EN_Zhtw.book 43 ページ ２０１２年１１月２８日 水曜日 午前９時４０分