background image

NOTE: 

This last example will display 26:20 if the On-Screen Display is turned on,

but if a ?F <CR> is sent to the player via computer, the player will return 262012.

NOTE:

Users should note that searching to the index and block levels on a CD is

possible with Level III computer control. These searches are not possible with the
remote control unit. 

Execution/CDs:

*  CD in Play or Pause Mode TM sets address flag to Time

T M 1212 S E  <CR>

R <CR>

* Searches to 12 minutes, 12 seconds and enters 

Pause Mode

BK sets address flag to Block

BK 030303 S E  <CR>

R <CR>

* Searches to  03 minutes, 03 seconds, Block 03, enters 

Pause Mode

NOTE:

The command ?B returns 030303.  On a CD, track and elapsed time or

track-index and time within the track can be displayed by using the remote control
unit. Determining the current block number, however,  must be done from Level III
control using the ?B command. For details see 

Section 2-5, On-Screen Displays in

Manual  Mode 

and 

Section 4.7.4

,

Request Commands: #36, Block No. Request

on page 4-33.

TR sets address flag to Track

T R 03 S E  <CR>

R <CR>

* Searches to track 03 and enters 

Pause Mode

.

IX sets address flag to Index

IX 03 01 S E  <CR>

R <CR>

* Searches to Track 03,  Index 01 and enters 

Pause Mode

NOTE:

If only one index is encoded on a CD track, and an instruction is sent to the

player to search to index 3, (IX0303SE) the player will search to the beginning of the
next track. (In this case, it will search to the beginning of Track 4.)

The range of address entries possible on CDs are described on page 4-7 and again in
the reference chart below. 

CLD-V2600 / 2400 Level I & III • Chapter Four

CLD-V2600 / 2400  Level  I & III User’s Manual

TP 117

v. 2.0

• 12/93

4-19

Address Flag

Range of Address

Time:

Minutes 00-99, Seconds 00-59*

Block:

Minutes 00-99, Seconds 00-59, Blocks 00-74

Tracks:

01-99

Index

Track 01-99 Index 01-99

* 74 minutes is the maximum playing time on a CD.

Figure 4-I

Содержание BARCODE CLD-V2400

















































































































































Отзывы: