When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to
REVERSE (R)
position is possible.
WARNING:
• USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION:
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or
backing into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
When connecting with a multi-channel processor
This product
Blue
Car stereo with
RCA output
40 cm
(1 ft. 4 in.)
RCA cable (supplied with multi-channel
processor controller)
Multi-channel processor
(e.g. DEQ-P8000)
(sold separately)
IP-BUS cable
(supplied with multi-channel processor)
Black
Blue
RCA cable (supplied with
multi-channel processor)
IP-BUS cable
(sold separately)
Optical cable (supplied with
multi-channel processor)
Blue
Black
Multi-channel processor
controller (e.g. AXM-P8000)
(sold separately)
Fig. 6
Connecting the Units
<ENGLISH>
Connection method
Clamp the lead.
1.
2. Clamp firmly with
needle-nosed
pliers.
CAUTION
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
Fuse resistor
8 m
(26 ft. 3 in.)
Extension lead (supplied)
Rear view camera
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
RCA cable
(sold separately)
Note:
• It is necessary to set to
AV INPUT2
in
SETUP
when
connecting a rear view camera.
To video output
This product
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
20 cm
(7-7/8 in.)
Fig. 5
When connecting the external video component and the display
Fig. 7
• It is necessary to set to
AV INPUT1
and
AV INPUT2
in
SET UP
when connecting the
external video component.
When using a display connected to rear video output
This product’s rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING:
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while
Driving.
• NEVER connect rear audio output (REAR AUDIO OUTPUT) to sold separately power amp.
External video
component
(sold separately)
RCA cables
(sold separately)
To video output
To audio outputs
This product
15 cm
(5-7/8 in.)
Rear video output
(REAR VIDEO OUTPUT)
Rear audio output
(REAR AUDIO OUTPUT)
Audio input 1
(AUDIO 1 INPUT)
20 cm
(7-7/8 in.)
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
Audio input 2
(AUDIO 2 INPUT)
Video input 1
(VIDEO 1 INPUT)
Display with
RCA input jacks
(sold separately)
RCA cables
(sold separately)
To video input
To audio inputs
28 cm
(11 in.)
When connecting with a rear view camera
Connection method
Clamp the lead.
1.
2. Clamp firmly with
needle-nosed
pliers.
CAUTION
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
Fuse resistor
8 m
(26 ft. 3 in.)
Extension lead (supplied)
Rear view camera
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
RCA cable
(sold separately)
Note:
• It is necessary to set to
AV INPUT2
in
SETUP
when
connecting a rear view camera.
To video output
This product
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
20 cm
(7-7/8 in.)