23
App
en
d
ix
Ambient conditions for playing
disc
• At extremely high temperatures, a temperature
cutout protects this product by switching it off
automatically.
• Despite our careful design of the product, as a
result of mechanical wear, ambient conditions
for use, or handling of the disc, small
scratches that do not affect actual operation
may appear on the disc surface. This is not a
sign of the malfunction of this product.
Consider it to be normal wear and tear.
Using the display correctly
• If liquid or foreign matter should get inside
this product, turn off the power
immediately and consult your dealer or the
nearest authorised PIONEER Service
Station. Do not use the product in this
condition because doing so may result in a
fire, electric shock, or other failure.
• If you notice smoke, a strange noise or
smell from the display unit, or any other
abnormal signs on the LCD screen or Sub
display, turn off the power immediately
and consult your dealer or the nearest
authorised PIONEER Service Station.
Using this product in this condition may
result in permanent damage to the system.
• Do not disassemble or modify this
product, as there are high-voltage
components inside which may cause an
electric shock. Be sure to consult your
dealer or the nearest authorised PIONEER
Service Station for internal inspection,
adjustments or repairs.
Handling the display unit
• When the LCD panel is subjected to direct
sunlight for a long period of time, it will
become very hot resulting in possible damage
to the LCD screen. When not using this unit,
close the LCD panel and avoid exposing it to
direct sunlight as much as possible.
• The display unit should be used within the
temperature ranges shown below.
• Operating temperature range: –10 to +50 °C
• Storage temperature range: –20 to +80 °C
• Do not use the display unit at temperatures
higher or lower than the operating temperature
range because the display unit may not
operate normally and the display unit can be
damaged.
• The LCD screen is exposed in order to increase
its visibility within the vehicle. Please do not
press strongly on it as this may damage it.
• Do not place anything on the LCD panel when
it is deployed. Also, do not attempt to carry out
angle adjustment, or open/close the LCD panel
by hand. Applying strong force to the LCD
panel may damage it.
• Do not push the LCD screen with much force
as this may scratch it.
• Never touch the LCD screen with anything
besides your finger when operating the Touch
Panel functions. The LCD screen can scratch
easily.
• Be careful not to place anything between the
LCD panel and the main body when the LCD
panel is opening or closing. If an object gets
between the LCD panel and main body, the
LCD panel may stop working.
• Be careful of fingers, long hair, and loose
articles of clothing which could possibly
get caught between the LCD panel and the
main body and cause serious injury.
Liquid crystal display (LCD)
screen
• If the LCD panel is near the vent of an air
conditioner when it is opened, make sure that
air from the air conditioner is not blowing on it.
Heat from the heater may break the LCD
screen, and cool air from the cooler may cause
moisture to form inside the display unit
resulting in possible damage. Also, if the LCD
panel is cooled down by the cooler, the LCD
screen may become dark, or the life span of
the small fluorescent tube used inside the LCD
panel may be shortened.
• Small black dots or white dots (bright dots)
may appear on the LCD screen. These are due
to the characteristics of the LCD screen and do
not indicate a problem with the display unit.
MAN-AVIC-X1R-EN.book Page 23 Wednesday, May 4, 2005 4:45 PM