Black plate (28,1)
1
Dashboard
2
Holder
3
Install this product into the holder.
1
1
Dashboard
4
Attach the trim ring.
1
2
1
Trim ring
2
Groove
Attach the trim ring with the side with a
groove facing downward.
Installation using the screw
holes on the side of this product
%
Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three locations
on each side.
Use either the truss head screws (5 mm ×
8 mm) or flush surface screws (5 mm ×
9 mm), depending on the shape of the brack-
et
’
s screw holes.
If the pawl interferes with installation,
you may bend it down out of the way.
1
2
3
1
Factory radio-mounting bracket
2
Dashboard or console
3
Truss head screw or flush surface screw
Be sure to use the screws supplied with
this product.
<CRD4952-B>28
Engb
28
Section
03
Installation