Black plate (161,1)
Customising the equaliser curves
You can adjust the currently selected equaliser
curve setting as desired. Adjustments can be
made with a 13-band graphic equaliser.
p
This function is available only when main
audio is available.
p
If you make adjustments when a curve
“
S.
Bass
”
,
“
Powerful
”
,
“
Todoroki
”
,
“
Vocal
”
, or
“
Flat
”
is selected, the equaliser curve set-
tings will be changed to
“
Custom1
”
auto-
matically.
p
If you make adjustments when the
“
Cus-
tom2
”
curve is selected for example, the
“
Custom2
”
curve will be updated.
p
“
Custom1
”
and
“
Custom2
”
curves can be
created common to all sources.
1
Press the HOME button to display the
Top menu screen.
2
Touch the following keys in the follow-
ing order.
The
“
Audio
”
screen appears.
3
Touch [Graphic EQ].
The
“
Graphic EQ
”
screen appears.
4
Touch one of the keys to select a curve
that you want to use as the basis of custo-
mising.
5
Touch the frequency for which you
want to adjust the level.
p
If you trail a finger across the bars of multi-
ple equaliser bands, the equaliser curve set-
tings will be set to the value of the touched
point on each bar.
Using the auto-adjusted equaliser
You can set the auto-adjusted equaliser to suit
the vehicle
’
s acoustics. To use this function,
the vehicle
’
s acoustics must be measured in
advance.
=
For details of the operations, refer to
ing the equaliser curve automatically (Auto
EQ)
p
To manually adjust the equaliser curve, set
“
Auto EQ&TA
”
to
“
Off
”
.
1
Press the HOME button to display the
Top menu screen.
2
Touch the following keys in the follow-
ing order.
The
“
Audio
”
screen appears.
3
Touch [Auto EQ&TA] repeatedly until
the desired setting appears.
!
Off
(default):
Turns the Auto EQ&TA setting off.
!
On
:
Turns the Auto EQ&TA setting on.
Adjusting the equaliser curve
automatically (Auto EQ)
By measuring the vehicle
’
s acoustics, the
equaliser curve can be adjusted automatically
to suit the vehicle interior.
WARNING
A loud tone (noise) may be emitted from the
speakers when measuring the vehicle
’
s acous-
tics. Never perform Auto EQ measurement while
driving.
CAUTION
!
Thoroughly check the conditions before per-
forming Auto EQ, as the speakers may be da-
maged if this is performed under the following
conditions:
—
When the speakers are incorrectly con-
nected. (For example, when a rear speaker
is connected as a subwoofer output.)
<CRB4523-A>161
Engb
161
Chapter
26
Audio
adjustments
Audio adjustments