Pioneer AVIC-F160, Руководство пользователя

Страница: 26 / 76

Black plate (26,1)
p
The map orientation is fixed at
“
Heading
up
”
when the 3D map screen is displayed.
1 Display the map screen.
=
For details of the operations, refer to Screen
switching overview on page 18.
2 Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3 Touch to switch the map orientation.
Each time you touch the key the setting
changes.
4 Touch [Back] to move the map back to
follow the current GPS position.
Changing the view angle of the
map
You can change the view angle of the map hor-
izontally or vertically.
p
You can change the vertical view angle of
the map in 3D mode only.
=
For details, refer to Switching the map be-
tween 2D and 3D on page 26.
1 Display the map screen.
=
For details of the operations, refer to Screen
switching overview on page 18.
2 Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3 Touch / to tilt up/down or / to
rotate left/right.
p
Touching the key once modifies the view in
large steps and touching and holding the
key modifies it continuously and smoothly.
4 Touch [Back] to move the map back to
follow the current GPS position.
Switching the map between 2D
and 3D
1 Display the map screen.
=
For details of the operations, refer to Screen
switching overview on page 18.
2 Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3 Touch or to switch between 2D
and 3D view modes.
Each time you touch the key the setting
changes.
p
When the 2D map screen is selected, is
displayed.
p
When the 3D map screen is selected, is
displayed.
4 Touch [Back] to move the map back to
follow the current GPS position.
<127075005641>26
Engb
26
Chapter
05
How to use the map