Black plate (20,1)
!
Before making a final installation of this
product, temporarily connect the wiring to
confirm that the connections are correct
and the system works properly.
Installing this product
Installation notes
!
Do not install this product in places subject
to high temperatures or humidity, such as:
—
Places close to a heater, vent or air con-
ditioner.
—
Places exposed to direct sunlight, such
as on top of the dashboard.
—
Places that may be exposed to rain,
such as close to the door or on the vehi-
cle
’
s floor.
!
Install this product in an area strong en-
ough to bear its weight. Choose a position
where this product can be firmly installed,
and install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
!
When installing, to ensure proper heat dis-
persal when using this product, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
!
The cords must not cover the area shown
in the figure below. This is necessary to
allow the amps and navigation mechanism
to dissipate heat.
4'#4
#7&+1
176
#7:
Do not cover this area.
For details on the installation method for each
vehicle type, refer to the separate installation
manual and install this product properly.
<CRD4965-A>20
Engb
20
Section
03
Installation
Содержание AVIC-EV01
Страница 139: ...Black plate 139 1 CRD4965 A 139 Nl 139 Nederlands ...