Remote control handling notes
• Always keep the remote control protected from direct sunlight or high temperatures.
Leaving the remote control in places exposed to direct sunlight or high temperatures for
long periods of time may cause deformation, discolouration or malfunction.
• Replace the battery when the remote control’s performance deteriorates.
• Do not install this unit in such a place as may obstruct the driver’s view.
• Since interior layout differs depending on the type of vehicle, the ideal installation loca-
tion for the unit also differs. When installing the unit, select a location that assures opti-
mum transmission of signals from the unit to the display.
Installing the holders and the steering remote control
Note:
• When the unit is installed on a right-hand-drive car, the horizontal positions are inverted.
26
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ENG/MASTER 96
27
1. Secure inner holder to the inner cir-
cumference of the steering wheel
with belt.
• Fit the inner holder to the steering wheel so
that the arrow-marked side faces the driver as
shown below.
2. Cut the extra portion of the belt at
the center of the inner holder.
Inner holder
Belt
CRD3801A_inst_001_030_Eng 4/1/03 2:17 PM Page 27
