7
En
En
g
lis
h
WARNING
•
Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fingers.
•
Do not use with the LCD panel left open. It may result in injury in the event of an accident.
CAUTION
•
Do not open or close the LCD panel forcefully. It may cause a malfunction.
•
Do not operate this product until the LCD panel has completely opened or closed. If this product is
operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety.
•
Do not place glass or can on the open LCD panel.
The LCD panel will open or close automatically when the ignition switch is turned on or
off. You can turn off the automatic close/open function.
•
Do not close the LCD panel by force with your hands. That will cause a malfunction.
•
The automatic close/open function will operate the display as follows.
– When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after
six seconds.
– When the ignition switch is turned ON again (or turned to ACC), the LCD panel will open
automatically.
– Removing or attaching the front panel will automatically close or open the LCD panel.
Protecting your unit from theft on (page 5).
•
When the ignition switch is turned OFF after the LCD panel has been closed, turning
the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this
case, press OPEN/CLOSE to open the LCD panel.
•
When closing the LCD panel, check to make sure that it has closed completely. If the
LCD panel has stopped halfway, leaving it like this could result in damage.
1
Press OPEN/CLOSE to open the LCD panel.
To close the LCD panel
Press OPEN/CLOSE again.
Basic operation
Notes on using the LCD panel
Opening and closing the LCD panel
To prevent the display from hitting the gearstick of an automatic vehicle when it is in the
P (park) position, or when you do not wish the display to open/close automatically, you
can set the automatic open function to manual mode.
1
Press .
2
Touch
then .
The system setting screen appears.
3
Touch [Auto Flap].
4
Touch the item.
[
On
]
The LCD panel will open or close automatically when the ignition switch is turned on
or off.
[
Off
]
You have to press OPEN/CLOSE to open/close the LCD panel.
When the LCD panel is upright and hinders the operation of the air conditioner, the
panel can be turned horizontally temporarily.
1
Press and hold OPEN/CLOSE to display the flap menu.
2
Touch
to flip the LCD panel down to the horizontal position.
NOTES
•
To return to the original position, press and hold OPEN/CLOSE.
•
The LCD panel returns to the original position automatically, indicated with a beeping sound 10
seconds after operation.
You can adjust the LCD panel slide position so that the panel is set back or forwards.
1
Press and hold OPEN/CLOSE to display the flap menu.
2
Touch
(slide to the back) or
(slide to the front) to move the LCD panel.
Important
•
If you can hear the LCD panel knocking against your vehicle’s console or dashboard, touch
from
the flap menu to temporarily level the LCD panel.
Setting the automatic open function
Turning the LCD panel horizontally
Adjusting the LCD panel slide position
Adjusting the LCD panel angle
