26
Chapter
61
Engb
2 Wrap the lock tie around the hook
above the HDMI port and the High
Speed HDMI
®
Cable, and then
tighten it to secure the High Speed
HDMI
®
Cable.
1
2
3
1
Hook
2
Lock tie
3
High Speed HDMI
®
Cable
p
Do not tighten up the lock tie more than
necessary.
Connecting a rear view
camera
When this product is used with a rear view
camera, it is possible to automatically switch
from the video to rear view image when the
gearstick is moved to REVERSE (R).
Camera
View
mode also allows you to check what is
behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
The screen image may appear reversed.
The rear view camera is used as an aid to
keep an eye on trailers, or backing into a
tight parking spot. Do not use this func-
tion for entertainment purposes.
Objects in rear view may appear closer or
more distant than in reality.
Please note that the image area shown
by the rear view camera may differ
slightly when full-screen images are
displayed when backing and when
checking the rear of the vehicle while
moving forward.
Rear view camera
(ND-BC6)
(sold separately)
This product
Brown (BC IN)
RCA cable
(supplied with ND-BC6)
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
To video output
Power cord
Power supply
For more details about the wiring, refer to
Connecting the power cord on page 58.
Notes
This mode is available when the rear view
camera setting is set to “
On
”.
For details, refer to Setting rear view
camera activation on page 41.
Connect this product to the rear view
camera only. Do not connect to any other
equipment.
Connecting the external video
component
■
Using AV input
To video output
To audio outputs
External video
component
(sold separately)
This product
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
Yellow
(VIDEO INPUT)
23 cm
15 cm
Note
This mode is available when the setting of AV
input is set to “
On
”.
For details, refer to Setting AV input on
page 40.
■
Using an AUX input
To
video
output
To
audio
outputs
External
video
component
(sold
separately)
This
product
Red,
white
RCA
cables
(sold
separately)
Yellow
AU
X
input
M
ini-
j
ac
k
AV
cable
(CD-R
M
1
0
)
(sold
separately)
Notes
This mode is available when the setting
of AUX input is set to “
On
”.
For details, refer to Starting procedure on
page 37.
When connecting an external video com-
ponent using a mini-jack AV cable, use a
separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you use
other cables, the wiring position might differ
resulting in disturbed images and sounds.
OK
G
V
R
L
G
R
V
L
L
:
L
e
f
t
audio
(
W
hite)
R
:
Ri
g
ht
audio
(Red)
V
:
Video
(Yellow)
G
:
Earth
