Pioneer AVH-P6300BT/XNUC, Руководство по обслуживанию

Страница: 84 / 209

AVH-P6300BT/XNUC
84
1 2 3 4
1 2 3 4
C
D
F
A
B
E
[Method for Mode IN]
Choose "EEPROM Adjust" among the monitor test mode menu screen.
[Display specifications]
3. EEPROM Adjust
example)
Adjustment value
Setting item
[Operation specification]
Operational description Remote controller key
Selection cursor up movement 2
Selection cursor down movement 8
Item content value up 6
Item content value down 4
Next menu page 9
Former menu page 7
Return to test mode menu 1
[Method for Mode IN]
Choose "EEPROM Initialize" among the monitor test mode menu screen.
[Display specifications]
Default of a cursor is the location of "No".
Choose "YES" and decide, initialize a setting value.
*) Don't turn off power while initializing.
When normally ends, "It succeeded" is displayed.
When will not end in four seconds, judged to be abnormal, "It failed" is displayed.
[Operation specification]
Operational description Remote controller key
Selection cursor left movement 4
Selection cursor right movement 6
Return to test mode menu 1
Menu enter 5
4. EEPROM Initialize
The setting items and the adjusted values are displayed on each page.
*The adjusted value section indicates initial values stored in EEPROM.
*If writing a value fails, the indication will not change.
When EEPROM is initialized, eject lock may be enabled. Please cancel eject lock in this case.