Pioneer AVH-P5750DVD, Руководство по обслуживанию

Страница: 144 / 212

AVH-P5750DVD/RC
144
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Coordinates Minimum Maximum
X
Y
pen tip for adjustment (zoom in)
out-of-alignment length
permissible screen area
58
64
248
241
Default is showed below.
2.2 Operation specification
2.3 Processing detail
Press [ENT] key of main unit or remote control unit to finish adjustment and store setting value (maximum and minimum
value) to EEPROM only when the taken value is within permissible zone.
Receive confirmation screen TP and display OK or NG after fulfilling the following conditions:
[O.K] is displayed after storing a taken value to EEPROM.
[NG] is displayed when a taken value is determined to be outside permissible zone.
2.4 Additional information
Consider diameter of the top of jig (pen tip) before adjusting outermost circumference.
Out-of-alignment length 0.8 mm
Perform calibration data operation with the size calculated
by subtracting out-of-alignment length from
permissible screen area.
Touch the outermost circumference of screen, and take outermost circumference value of X, Y.
Press [ENT] key of main unit or remote control unit to finish adjustment.
After finishing adjustment, if a taken value is within permissible zone, enter [O.K] at the center, and if it is outside
permissible zone, enter [NG] at the center.
Then, press [ENT] key of main unit or remote control unit to return to TOP MENU.