!
The automatic close/open function will op-
erate the display as follows.
—
When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
—
When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will be opened automatically.
—
Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to page 12.)
!
When the ignition switch is turned OFF
after the LCD panel has been closed, turn-
ing the ignition switch ON again (or turning
it to ACC) will not open the LCD panel. In
this case, press
OPEN/CLOSE
to open the
LCD panel.
!
When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children
’
s hands and fin-
gers.
%
Press OPEN/CLOSE to open the LCD
panel.
#
To close the LCD panel, press
OPEN/CLOSE
again.
Adjusting the LCD panel angle
Important
!
If you can hear the LCD panel knocking
against your vehicle
’
s console or dashboard,
touch
TILT
(
) to move the LCD panel a little
forward.
!
When adjusting the LCD panel angle, be sure
to touch
TILT
(
/
). Forcibly adjusting the
LCD panel by hand may damage it.
%
Touch TILT (
/
) to adjust the LCD
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you touch
TILT
(
/
) and hold.
#
The adjusted LCD panel angle will be memor-
ized and automatically returned to the next time
the LCD panel is opened.
Turning the LCD panel horizontal
When the LCD panel is upright and it hinders
the operation of the air conditioner, the panel
can be turned horizontal temporarily.
%
Press and hold OPEN/CLOSE to turn the
LCD panel horizontal.
#
To return to original position, press and hold
OPEN/CLOSE
again.
#
The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.
<
CRB2974-A/N
>20
Operating this unit
En
20
Section
03
