Switching between the device
names and BD addresses.
#
To cancel searching, touch
Stop
.
#
If five devices are already paired,
Memory Full
is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to
#
If no device can be found,
Not Found
is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
4
Touch a device name to select the de-
vice you want to connect to.
While connecting,
Pairing
is displayed. If the
connection is established,
Paired
is displayed.
#
If the connection fails,
Error
is displayed. In
such cases, try again from the beginning.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to
#
When establishing connection, the icon is dis-
played.
Touch the icon to disconnect the device.
Disconnecting a Bluetooth device.
#
If you want to delete a paired Bluetooth tele-
phone, display
Delete OK?
. Touch
Yes
to delete
the device.
Deleting a paired device.
#
Never turn the unit off while the paired Blue-
tooth telephone is being deleted.
Using a Bluetooth device to
pair
(Function of AVH-P3200BT)
If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Special Device to select the spe-
cial device.
#
Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
3
Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
#
If five devices are already paired,
Memory Full
is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to
4
Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting,
Pair your phone
is dis-
played. If the connection is established,
Paired
is displayed.
#
If the connection fails,
Error
is displayed. In
such cases, try again from the beginning.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to
Connecting to a Bluetooth
device automatically
(Function of AVH-P3200BT)
En
42
Section
12
Detailed instructions