En
g
lis
h
- 37 -
The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
Audio settings
Menu Item
Description
[Graphic EQ]
[S.Bass] [Powerful]
[Todoroki] [Vocal] [Flat]
[Custom1] [Custom2]
Select or customise the equaliser curve.
Select a curve that you want to use as the basis of customising
then touch the frequency that you want to adjust.
TIPS
•
If you make adjustments when a curve [S.Bass], [Powerful],
[Todoroki], [Vocal], or [Flat] is selected, the equaliser curve
settings will be changed to [Custom1] mandatorily.
•
If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
•
[Custom1] and [Custom2] curves can be created common to all sources.
[Fader/Balance]
Touch
or
to adjust the front/rear speaker balance. Set
[Front] and [Rear] to [0] when using a dual speaker system.
Touch
or
to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
[Source Level Adjuster]
[-4] to [+4]
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch
or
to adjust the source volume after
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
•
Settings are based on the FM tuner volume level, which remains
unchanged.
•
This function is not available when the FM tuner is selected as
the AV source.
[Subwoofer]
[On] [Off]
Select enable or disable subwoofer output from this
product.