!
You cannot adjust
Color
,
Hue
and
Contrast
for the audio source.
1
Display the system menu.
Refer to
Introduction of menu operations
2
If you are adjusting the
Picture Adjustment, select the unit.
NAVI
Apps
Completing
Picture Adjustment
for the Navigation system when
the RGB input setting is set to
NAVI
.
Completing
Picture Adjustment
for the Advanced App Mode
when the RGB input setting is
set to
iPhone
.
Adjusting the
Picture Adjust-
ment
for the rear view camera.
Source
Adjusting the
Picture Adjust-
ment
for the source.
3
Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment
items are displayed.
!
Brightness
–
Adjusts the black intensity
!
Contrast
–
Adjusts the contrast
!
Color
–
Adjusts the color saturation
!
Hue
–
Adjusts the tone of color (red or
green is emphasized)
!
Dimmer
–
Adjusts the brightness of the dis-
play
!
Temperature
–
Adjusts the color tempera-
ture, resulting in a better white balance
!
RGB Dot Adjustment
–
Adjusts phase
shifting by dot clock when a Navigation sys-
tem is connected
#
You can adjust
Hue
only when the color sys-
tem is set to NTSC.
#
With some rear view cameras, picture adjust-
ment may not be possible.
4
Touch
c
or
d
to adjust the selected
item.
Each time you touch
c
or
d
, the level of the
selected item increases or decreases.
#
Dimmer
can be adjusted from
+1
to
+48
.
#
Temperature
can be adjusted from
+3
to
–
3
.
5
Touch RGB Dot Adjustment to adjust.
#
RGB Dot Adjustment
can be set to
1
or
2
.
Notes
!
You cannot operate this function while driving.
!
Different
Brightness
/
Contrast
/
Dimmer
set-
tings can be set for when the illumination
switch is on and when it is off.
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car
’
s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
!
To perform this function, dedicated micro-
phone (e.g. CD-MC20) is required.
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto TA
or auto EQ while driving.
CAUTION
!
Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
—
The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
—
A speaker is connected to a power amp de-
livering output higher than the speaker
’
s
maximum input power capability.
!
If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in battery drainage. Be sure to place
the microphone in the specified location.
En
57
Section
13
Menu
operations
Menu operations