Pioneer AVH-2400BT, Руководство пользователя

Страница: 72 / 112

#
If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.
Switching between the device
names and Bluetooth device ad-
dresses.
#
To cancel searching, touch Stop .
#
If five devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
#
If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
4 Touch a device name to select the de-
vice you want to connect to.
While connecting, Pairing is displayed. If the
connection is established, Paired is displayed.
!
6-digit number appears on the display of
this unit. Once the connection is estab-
lished, this number disappears.
#
If the connection fails, Error is displayed. In
such cases, try again from the beginning.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
#
Once the connection is established, the de-
vice name is displayed.
Touch the device name to disconnect.
#
If you want to delete a paired Bluetooth tele-
phone, display Delete OK? . Touch Yes to delete
the device.
Deleting a paired device.
#
Never turn the unit off while the paired
Bluetooth telephone is being deleted.
Using a Bluetooth device to pair
(Function of AVH-P4400BH/AVH-P3400BH/
AVH-P2400BT)
If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 34.
2 Touch Special Device to select the spe-
cial device.
#
Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
3 Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
#
If three devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
4 Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting,
Pair your phone
is dis-
played. If the connection is established,
Paired is displayed.
#
If the connection fails, Error is displayed. In
such cases, try again from the beginning.
#
You may also need to enter a PIN code into
this unit. If your telephone requires a PIN code to
establish a connection, look for the code on the
telephone or in its accompanying documenta-
tion.
#
The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
En
72
Section
15
Menu operations