Installation
Important
!
Check all connections and systems before
final installation.
!
Do not use unauthorized parts. Use of un-
authorized parts may cause malfunctions.
!
Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
!
Do not install this unit where :
—
it may interfere with operation of the vehi-
cle.
—
it may cause injury to a passenger as a re-
sult of a sudden stop.
!
When mounting this unit, make sure none of
the leads are trapped between this unit and
the surrounding metalwork or fittings.
!
Do not mount this unit near heater outlets
where it would be affected by heat, or near the
doors where rainwater might splash onto it.
!
Before drilling any mounting holes, always
check behind where you want to drill the
holes. Do not drill into the gas line, brake line,
electrical wiring or other important parts.
!
If this unit is installed in the passenger com-
partment, anchor it securely so it does not
break free while the vehicle is moving, caus-
ing injury or an accident.
!
If this unit is installed under the front seat,
make sure it does not obstruct seat move-
ment. Route all leads and cords carefully
around the sliding mechanism so they do are
not caught or pinched in the mechanism and
cause a short-circuit.
Installing the hide-away unit
Thoroughly wipe off the surface before affixing
the hook and loop fasteners.
!
If the hook fasteners adhere to the car mat
directly, you may install this unit without
using the loop fasteners.
%
Mount the hide-away unit using the
hook and loop fasteners.
Hide-away unit
Hook fastener
Loop fastener
Car mat or chassis
Connection and
installation
En
18
Section
04
