Pioneer AppRadio SPH-DA100, Руководство по эксплуатации

Страница: 43 / 56

08
Customising preferences
Chapter
43
Engb
Customising preferences
❐
In the rear view mode, if you do not touch
the screen for 7 seconds while displaying
the following screens, the screen switches
to the rear view screen automatically.
Radio and iPod source screens
Advanced App Mode screen
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
❐
Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R) from
another position.
❐
When the screen changes to full-screen rear
view camera image during normal driving,
switch to the opposite setting in “
Camera
Polarity ”.
1 Display the “System” screen.
➲
For details, refer to Customising the system
settings on page 38.
2 Tap [Camera Polarity].
You can select the following polarity:
Off
(default)
: When the rear view camera
is not connected to this product.
Battery
: When the polarity of the con-
nected lead is positive while the gearstick
is in the REVERSE (R) position.
Ground : When the polarity of the con-
nected lead is negative while the gear-
stick is in the REVERSE (R) position.
•
•
•
•
•
Setting the video signal
You can select the suitable video signal setting
for your country.
❐
As this function is initially set to “ Auto ”, the
product will automatically adjust the video
signal setting.
However, the screen may turn black or im-
ages may not be displayed properly when
“
Auto ” has been selected and the recep-
tion is weak. Normally, select the appropri-
ate TV signal.
❐
Regarding your country TV signal, consult
with your nearest Pioneer dealer.
❐
You can operate this function only for the
video signal input into the AV input.
1 Display the “System” screen.
➲
For details, refer to Customising the system
settings on page 38.
2 Tap [Video Signal Setting].
The “ Video Signal Setting ” screen appears.
3 Tap or to select the desired video
signal.
Auto
(default)
— PAL — NTSC — PAL-M —
PAL-N — SECAM