Black level
You can adjust the black intensity.
Each time you tap
or
increases or decreases the
level.
“
5
”
to
“
1
”
is displayed as the level is increased or
decreased.
General settings
1
Display the general settings screen.
2
Tap
.
Make the following settings.
Radio Region
You can set the radio reception area.
!
North America
(default):
Sets the radio reception area to
“
North America
”
.
p
When you use this product in North America,
select
“
North America
”
.
!
Other
:
Sets the radio reception area to
“
Other
”
.
p
When you use this product in Europe, Russia
or Australia, select
“
Other
”
.
Local
Local seek tuning allows you to tune in only those
radio stations with sufficiently strong signals for good
reception.
!
OFF
(default):
Turns off local seek tuning.
!
Local
:
Turns on local seek tuning.
GPS Check
You can check the reception status of GPS antenna.
!
Received
:
Indicates that a signal has been received by the
GPS antenna.
!
No Signal
:
Indicates that no signal has been received by the
GPS antenna.
System Reset
You can return settings or recorded content to the de-
fault or factory settings.
=
For details, refer to
Returning this product to the
initial state
on page 27.
Software Version
The current version is displayed.
=
For details of software upgrades, refer to the infor-
mation on our website.
Time settings
1
Display the general settings screen.
2
Tap
.
Make the following settings.
Clock mode
!
12Hr
(default):
Changes the display to 12-hour format with am/
pm.
!
24Hr
:
Changes the display to 24-hour format.
Summer Time
You can set daylight saving time. You can adjust the
time difference from one hour in 15-minute decre-
ments.
Changing the date settings
1
Display the general settings screen.
2
Tap
.
3
Tap [Date].
4
Tap
or
to adjust the system
’
s date.
Setting the time difference
You can adjust the system
’
s clock.
1
Display the general settings screen.
2
Tap
.
3
Tap [Time].
4
Tap
or
to adjust the system
’
s
clock.
Subwoofer settings
1
Display the general settings screen.
En
24
Chapter
09
Customizing preferences