−
27
−
English
Event Recording
Automatic Recording by Detecting Impacts (Event Recording)
The video recording file when an impact is detected by this product (the dash camera), such as an
impact with another vehicle, is recorded as an event video file to the “Event” folder.
The number of event video files and recording times will differ depending on when an impact is
detected.
Detection early in file
If an impact is detected within 20 seconds of the start of recording of a video recording file, then the file
before that in which this impact was detected and the file for the 20 seconds after the impact is
detected are recorded as two event video files.
Event video file 2
Impact detected
20 seconds
Event video file 1
Within 0 to 20 seconds
Detection late in file
If an impact is detected in the 19 seconds before the end of recording of a video recording file, then
this file has its recording extended for 20 seconds after the impact is detected, and it is recorded as a
single event video file.
Impact detected
20 seconds
Event video file 1
Within 19 seconds
Extended
Detection other than early or late in a file as above
The video from 20 seconds after the impact is detected and the video recording file recorded from
immediately before are recorded as a single event video file.
If the impact continues during the event recording period, an event file of up to 20 seconds will be
added.
Manual Recording (Manual Event Recording)
If manual record button is pressed during video recording, then this is recorded as an event video file
with the same specifications as an event recording.
Notes
•
You can adjust the sensitivity for detecting impacts.
“Product Settings” - “Configurable Features”
-
“Recording Setting”- “G-Sensor”
•
When impact is detected or manual recording is performed in the event recording mode, event
recording is started again after event recording ends.
•
The recording time may differ depending on the conditions.
