Pioneer 3LG160 Series, Руководство по установке

Страница: 8 / 9

8 REV-01 14, 13
To Set or Adjust Tem pera ture Limit Stop
Caution: Ceramic cartridge is preset at the factory at maximum tempera-
ture. Adjust as necessary. Please see the instructions below:
Turn off water and relieve the pressure. •
Remove handle (U) by removing Button (W) and loosening set •
screw (V) and lift off the handle (U). Note : For 3LG180, 3LG180B
and 3LG181- Remove handle (U) by remove button (W) (located on
the top of the handle) and loosening Phillips screw.
Unscrew retainer sleeve (X) and retaining nut (Y). •
Use two fingers to raise the red adjustment ring (Z). •
Turn adjustment ring (Z) counterclockwise to decrease the tempera- •
ture setting and clockwise to increase the temperature. Replace the
adjustment ring (Z).
Reassemble and test until desired safe temperature is reached. •
(Note: Ensure proper alignment of cartridge with notch in valve
body.)
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.