5
REV-01 25, 13
Faucet Installation
5. Use main supply hose(K) to connect hot and cold inlet hose to main
supply stop(L). Tighten with adjustable wrench. Do not overtighten.
6. Install the weight along with the spray hose(C) such a way that pull down
spray head easily retractable.
7. Connect the spray hose(C) to the spray head outlet(A). Do not
overtighten. Turn on main supply stops. Check of any leaks. Make sure
all the connection are secure. Remove aerator and turn on handle to
flush and allow water to run at full flow for at least one minute. Turn off
handle. Replace aerator.