Pioneer 1200, Руководство по техническому обслуживанию

Страница: 250 / 300

MC012C-AS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK Unitized Transaxle Removal
Page 16-8 2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
16
Unitized Transaxle Removal, Continued:
5.4. Remove wire tie (6) securing the cable to the vertical support (Figure 16-63, Page 16-28) .
5.5. Remove the cover from the electrical component box.
5.6. Loosen the hardware securing the accelerator cable to the box and disconnect the cable from the
actuator cam and remove it from the box (Figure 16-15, Page 16-9) .
5.7. Disconnect the engine ground wire from the oil filler tube mounting bracket (Figure 16-16,
Page 16-9) .
Figure 16-12 Differential Lock Cable Bracket
Figure 16-13 Differential Lock Cable Removal
CCI 1020
46601
REDUCED STEERING
CONTR
OL MAY CA
USE
SERIOUS INJUR
Y OR DEA
TH
Disenga
ge diff
erential loc
k on
paved surfaces.
WARNI
NG
1
2
1. Apply pressure to
locking tabs of the cable.
2. Pull cable sheath toward
rear of vehicle to disconnect
from the bracket.
CCI 1020
46601
REDUCED STEERING
CONTR
OL MAY CA
USE
SERIOUS INJUR
Y OR DEA
TH
Disenga
ge diff
erential loc
k on
paved surfaces.
WARNIN
G
1
2
Rotate the cable
connector toward the
driver side of the vehicle
to disconnect the cable
from the differential lock lever.