5
CAUTION
•
After connecting to the terminals, lightly pull the speaker cord to make sure that heads of the speaker cord are securely connected to the
terminals. A loose connection might cause audio output to be interrupted or noise to be output.
•
When connecting the speaker cord, thoroughly twist the core wires, and make sure that the core wires are not protruding out of the speaker
terminals. Core wires protruding out of the speaker terminals may come into contact with the rear panel or with each other. This may cause an
excessive load to be placed on the amplifier which results in operation stopping or a malfunction.
•
If a mistake is made with the polarities (+, -) on the LEFT and RIGHT sides when connecting the LEFT and RIGHT speaker cord, normal
stereo effect can no longer be obtained.
Listening to the music of a
Bluetooth
device
These speakers allow you to wirelessly enjoy tracks saved to a
Bluetooth
device.
When using the speakers connected with a
Bluetooth
device for the first time or when connected with another
Bluetooth
device, you
need to pair the speakers and a
Bluetooth
device.
Pairing (device mutual registration) is the operation required to connect a
Bluetooth
device and the speakers.
Pairing and connection procedure
1 Turn on the [POWER] switch on the speaker.
•
The Paring indicator flashes for approximately 30 seconds and the speakers enter Pairing mode.
•
If the Pairing indicator is off, press and hold the pairing button for at least 2 seconds to switch to Pairing mode again.
2 Perform the pairing procedure on a
Bluetooth
device.
Perform the pairing procedure on a
Bluetooth
device while the speakers are in paring mode. For details, see the instruction
manual of your
Bluetooth
device.
3 The Pairing indicator on the speaker stops blinking and lights up when the connection is complete.
The Pairing indicator turns off if the speakers can’t pair with a
Bluetooth
device within 30 seconds.
•
A
Bluetooth
device that has already been paired can be connected by performing the connection procedure on the
Bluetooth
device side if
the speakers are powered on.
Playback
When you play music on a connected
Bluetooth
device, the music playing on the
Bluetooth
device is output from the speakers.
•
You can play/pause a track playing on a
Bluetooth
device by pressing the pairing button. (same function as the pause/play button on the
Bluetooth
device).
CAUTION
•
When pairing (connecting), move the
Bluetooth
device close to the speakers.
•
Loud sound may be output when the playback operation is performed for the first time after connecting completes so we recommend lowering
the volume before playback.
•
The pause/play operation may not be possible with the pairing button depending on the application used.
•
Connecting with the speakers may not be possible depending on the
Bluetooth
device.
•
If you wish to pair the speakers with a different
Bluetooth
device, turn off the
Bluetooth
function of the currently connected
Bluetooth
device or
disconnect the connection before performing the pairing operation.
•
The speakers store the pairing information of up to eight
Bluetooth
devices, and attempt to connect to the last paired device if the pairing
button is pressed in the state of no connection with a
Bluetooth
device.
