3
Rear panel
2
3
4
5
6
1
1
RCA INPUT terminals
These are RCA pin type unbalanced input terminals.
2
STEREO MINI INPUT terminal
This is a 3.5 mm stereo mini jack type unbalanced input
terminal.
3
Speaker connection connectors
Connect the left and right speakers using the supplied cord.
Do not connect these speakers to an amplifier other than that
of this system. Doing so may cause a damage or fire.
4
POWER switch
Turns the power for the speakers on and off.
5
AC IN
Connect to a power outlet with the supplied power cord.
Connect the power cord after all the connections are
complete.
Use the supplied power cord.
6
SOUND MODE switch
Switches between the DJ mode and PRODUCTION mode.
DJ mode: For a punchy sound suited for DJ applications.
PRODUCTION mode: For flat frequency response that
accurately reproduces the input sound.
CAUTION
The
POWER
switch on this unit will not completely shut off all
power from the AC outlet. Since the power cord serves as the main
disconnect device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make sure the unit has
been installed so that the power cord can be easily unplugged from
the AC outlet in case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet when left unused
for a long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En
CAUTION
•
This product is provided with an auto standby function. If a state
of no sound continues for a set time (approximately 10 hours)
during use, the product automatically turns off the POWER
indicator and enters Standby mode with low power consumption
regardless of whether there is a
Bluetooth
connection.
•
If the product enters Standby mode when there is a
Bluetooth
connection, the
Bluetooth
connection is disconnected and the
Pairing indicator also turns off.
•
When an audio signal is input from the input terminals in
Standby mode, the product automatically enters Power-on
mode. Furthermore, the product also enters the Power-on mode
if the
Bluetooth
pairing button is pressed while in Standby mode.
•
This auto standby function cannot be disabled.
6
Pairing indicator (Page 5)
When flashing: Pairing operation is performed or waiting to
connect
When lit: Connected with a
Bluetooth
device
7
4 inch glass fiber woofers
8
Bass reflex ducts
9
Grooves
Adjust the airflow of the bass reflex ducts to radiate low
frequencies smoothly.
a
Headphone terminal
This is a 3.5 mm stereo mini jack type output terminal.
Connecting headphones mutes the sound output from the
speakers and outputs the sound only from the headphones.
