52
Multi I/O
Multi I/O section
1.
Mobile device connection terminal (USB port)
Connect a mobile device.
2.
USB connection indicator
Lights up when a compatible mobile device is connected, and blinks when an
incompatible mobile device is connected.
3.
MODE selector indicator
Indicates an external FX unit and effect input method selected with the [
MODE
] selector
button.
4.
MODE selector button
Selects an external FX unit and effect input method.
— [USB]
: Selects a mobile device connected to the mobile device connection
terminal.
— [1/4"JACK]
: Selects an external FX unit connected to the [
MULTI I/O
RETURN
]
terminals.
— [CH 2/CH 5]
: Outputs the sound of a channel selected with the [
CH SELECT
]
switch to an external FX unit or a mobile device, and routes the effected sound to
a channel for which [
MULTI I/O
] is selected with the input selector switch.
— [INSERT]
: Outputs the sound of a channel selected with the [
CH SELECT
]
switch to an external FX unit or a mobile device, and routes the effected sound to
the channel selected with the [
CH SELECT
] switch.
5.
CH SELECT switch
Selects a channel to add the MULTI I/O effect to.
1
2
4
5
6
7
3
Содержание DJM-V10-LF
Страница 18: ...18 PC Mac setup Checking the firmware and software versions 1 Click the About tab...
Страница 32: ...32 Audio output 4 Touch OK To cancel the setting touch CANCEL 5 Touch The UTILITY screen closes...
Страница 49: ...49 Send 1 The SIZE FEEDBACK TIME and TONE knobs are not available for this setting...
