PIONEER DJ DJM-V10-LF, Руководство пользователя

Страница: 40 / 90

40
Microphones
— [TALK OVER]
: Sets the microphone to TALK OVER mode. The sound from
channels other than the MIC channels is attenuated when sound over –10 dB is
input to a microphone.
• You can change the TALK OVER mode setting and attenuation level in [ TALK OVER ]
in [ MY SETTINGS ] (page 74).
5.
BEAT FX ASSIGN button
(page 55)
Using a microphone
1 Connect a microphone to the [MIC1] or [MIC2] terminal.
Read more: Connecting to the input terminals (page 20)
2 Set the [OFF, ON, TALK OVER] selector switch to set the
microphone output.
3 Turn the [LEVEL (MIC1, MIC2)] knob to adjust the microphone
volume.
• Note that turning the knobs too far clockwise outputs the sound at a high volume
level.
4 Turn the [EQ (HI, LOW)] knobs to adjust the volume of each
band.
5 Speak into the microphone.
To add BEAT FX to the microphone sound, see Beat FX section (page 55).