PIONEER DJ DDJ-XP2, Руководство по эксплуатации

Страница: 10 / 120

10
En
7 Connect the unit to your PC/Mac using the supplied USB cable.
• The unit works with the standard driver of your PC/Mac’s operating system. You don’t need to install separate driver software for the unit.
• When [DDJ-XP2 is connected.] appears on the rekordbox dj screen, the DDJ-XP2 is ready to use.
Playing tracks
Tracks loaded on the deck start playing when you play the rekordbox dvs vinyl on the analog player.
Quitting the system
1 Quit rekordbox.
2 Disconnect the USB cable from your PC/Mac.
Using Serato DJ Pro
You need the following equipment and Serato DJ Pro software to operate the unit.
DJ controller or DJ mixer
You need a DJ mixer such as DJM-S9 or DJ controller such as DDJ-SX3, compatible with Serato DJ Pro.
Connection examples
Connecting to a Serato DVS system using analog players and a DJ mixer
DDJ-XP2
PC/Mac
USB cable (supplied)
USB cable
Audio cable
Analog player
PLX-1000 etc.
DJ mixer
DJM-S9 etc.
Analog player
PLX-1000 etc.
Audio cable
For connecting to DDJ-XP2,
be sure to use the supplied
USB cable for high level
performance.
This product satisfies electromagnetic noise regulations
when it is connected to other equipment through
shielded cables (with Ferrite-cores attached) and
connectors.
Use only the furnished accessory connecting cables.
D44-8-1-2b_A1_En
The ferrite-cores are for the purpose of preventing
electromagnetic noise, do not remove them.
D44-8-1-4_A1_En