5) To prevent the TV's speakers from interfering with the Soundbar's output, please find the Audio Settings
section in your TV's Menu System and turn off the TV's internal speakers. The TV's speakers must be
turned 'off'; the TV volume cannot just be turned down as this would result in no output on the headphone or
RCA jacks for the Soundbar! If you are unable to turn off your TV's speakers and are connected to its RCA
outputs please try using the headphone output instead.
6) Connect your Soundbar's power supply to the input power jack on the rear of the Soundbar and to live wall
power. For this connection type, you can simply continue to use your TV remote to control the Soundbar's
volume level and do not need to, and should not, use the Soundbar remote. Depending upon your TV's
output level (in the middle section of its Volume range) you may find the Soundbar to be a bit too loud or too
soft. If too loud move the Soundbar's Gain switch to the 20 dB position, if too soft move the Gain switch to
the 40 dB position. Please skip to the next section titled "Subwoofer".
7) Connect your Soundbar's power supply to the input power jack on the rear of the Soundbar and to live wall
power. To prevent the TV's speakers from interfering with the Soundbar's output, please find the Audio
Settings section in your TV's Menu System and turn off the TV's internal speakers. (If you are unable to turn
off your TV's speakers please try using the headphone output instead. If no headphone output is available
simply turn the TV volume all the way down and
only
use the Soundbar remote to control the Soundbar's
volume. Please skip to Point #9.)
8) To control the Soundbar's volume with this connection type you can either use the Soundbar remote or
program the Soundbar to work with your TV remote as follows:
Press and hold the Mute button on the rear of the Soundbar until its power LED goes out.
Press the Soundbar function button (Volume-, or Mute) on the rear of the Soundbar, that you
want to program. The LED turns red.
Point your TV remote at the front of the Soundbar and press the appropriate function key on your TV
remote. If programming is successful the Soundbar LED should turn green (or stay red if Soundbar is in
standby mode).
Repeat the steps above until all three TV remote functions are programmed into your Soundbar.
Test all functions, if any fail to work properly repeat the steps above for that function. Depending upon
your TV model a quick remote button press may work better than pressing & holding a remote button. If
after repeated programming attempts no functions work correctly we suggest you try programming your
Soundbar using a different (or the included) remote.
9) If you connected your Soundbar to your TV's Fixed RCA outputs: Depending upon your TV's output level you
may find the Soundbar to be a bit too loud or too soft. If too loud move the Soundbar's Gain switch to the 20
dB position, if too soft move the Gain switch to the 40 dB position.
Note: If you have connected your Soundbar to your TV's digital output and are just hearing static, please set
your TV's digital audio output type to ‘PCM’ using the TV's Menu System. If you are unable to set your TV's
digital audio output type to PCM then please connect the Soundbar to the TV's Headphone or Variable RCA
outputs.
SUBWOOFER:
If you have a Powered Subwoofer, connect it to the Sub Out jack on the rear of the Soundbar using an RCA
cable.
