Pinnacle Technology LS2R15, Руководство пользователя

Страница: 43 / 76

39
c. Confirm the Netware wire is smooth and communication connecting header is used correctly. There
are two types of communication port RS-232 which uses 9-pin or 25-pin connecting port attached
with the scale and RS-422 which uses RST-11A connecting head.
d. If the above are right, detect whether main board or power board is wrong and change the wrong
main board or power board.
2. Downloading is stopped at 1/N (n represents some number) and computer shows message
“communicate error!”
Reason: Main board is error, which may be caused by chip damage.
Treatment: Change main board or chip (ROM).
Question about display:
Display can‟t show all characters or even a character.
Reason: a. Display pole has not been installed well, which causes the display and the machine in bad contact.
b. Water flows into the base seat of display pole which makes link board short-circuit or rotten.
c. Display is damaged.
Treatment: a. Install display pole and fix the bolt.
b. Change link board or display pole.
c. Change display pole.
Other question:
Roll p
aper can‟t be driven by print.
Reason: maybe roll paper doesn‟t get well along with rotating axis. Or there is some matter with rotating axis.
Reason: Maybe roll paper doesn‟t get well along with rotating axis. Or there is some matter with rotating axis.
Treatment: Install the printer again which had better be processed by our company.