4 D
EKO
C
AST
Quick Install
1. Connect Keyboard, Mouse and Monitor to the CPU
•
Open and inspect the box contents.
•
Connect keyboard cable to the keyboard connector (14).
•
Connect mouse cable to the mouse connector (15).
•
Connect the SVGA monitor cable to the 15-pin “D” connector (2).
2. Connect Video Reference
•
Connect a reference video in signal to the Reference connector (4).
Reference video in is terminated.
3. Connect Video Inputs and Outputs
Input/Output (IO) connection depends upon whether you are using
single-channel, dual-channel, or single-channel plus key. DekoCast
must be configured appropriately based on IO setup (see the DekoCast
User’s Guide for proper IO configuration).
OUTPUT
•
If output is downstream of the switcher, the
VIDEO A OUT
BNC (5)
supplies serial digital output.
•
If output is upstream of the switcher, the
VIDEO A OUT
BNC (5)
supplies serial digital output, and the
KEY A
(
VIDEO B
)
OUT
BNC
(6) supplies serial digital key output.
•
If you have two channels of output, the
VIDEO A OUT
BNC (5)
supplies output from the first (A) channel; the
KEY A
(
VIDEO B
)
OUT
BNC (6) supplies serial digital output from the second (B)
channel.
INPUT
•
If you have a single serial digital input source, connect it to the
VIDEO A IN
BNC
(7).
•
If you have video plus key input, connect the serial digital video in
to the
VIDEO A IN
BNC (7), and connect key input to the
KEY A
(
VIDEO B
)
IN
BNC
(8).
•
If you have two input sources, connect them to the
VIDEO A IN
BNC (7) and the
KEY A
(
VIDEO B
)
IN
BNC
(8).
