Moving and Positioning the Heater
There is a brake in each of the front wheels of your heater
that helps keep it in place when in use. To engage the
brakes, push the lever down on each wheel.
To move the heater, release the brakes, simply by flipping
the levers on both brakes up (See Figure 5).
Shutdown Instructions
1. Turn the Gas Valve Knob to the “PILOT/IGN” position.
2. Turn the Gas Valve Knob to the “OFF” position.
3. Turn the knob at the LP cylinder clockwise to the OFF
position.
4. Disconnect Regulator Hose from the LP cylinder.
Storage
Always disconnect the LP cylinder from the regulator assy
and remove the LP cylinder from the heater before putting
the heater into storage.If for any reason the heater is to be
stored indoors, the heater MUST be disconnected from the
LP cylinder, and the cylinder stored outdoors in a well-ven-
tilated area, out of the reach of children, and in accor-
dance with the Standard for Storage and Handling of
Liquefied Gases, ANSI/NFPA 59 - latest edition. The plas-
tic valve plug or valve cover supplied with the LP cylinder
must be reinstalled on the valve to protect the fitting from
damage.
NOTE: Repair of this heater should be done by a quali-
fied service person.
It is recommended that you save all of the packaging
materials that came with your heater, and re-package the
heater using these materials for safe storage.
Debris, dust and dirt inside of the heater body can affect
the performance of your heater. This debris can impair the
heaters ability to draw air for ventilation and combustion.
Spiderwebs can also appear during periods of inactivity.
Be sure to inspect the heater before each use to look for
any such obstructions. Be sure to keep the air passage-
ways, burner and combustion areas clean. Wipe with a
damp cloth or use a vacuum cleaner to clean these areas.
It is suggested that you perform a thorough cleaning at
least once every 30 days of operation. You may need to
clean the heater more often if conditions are naturally dirty.
A yellow tipping of the pilot flame indicates that the burner
area may be in need of cleaning.
Propane
Cabinet Heaters
NEVER LEAVE HEATER
UNATTENDED WHILE BURNING,
OR WHILE CONNECTED TO A
FUEL SOURCE
21
2) )
Figure 5.
Casters and Brakes
WARNING:
Never store an LP cylinder inside of a
building, or near any other gas or oil burning appli-
ances.
CAUTION:
Always be sure that the heater has
been allowed to cool for at least 30 minutes before
attempting to store, service, or maintenance.
WARNING! This heater is not intended for residential use.
Figure 4.
Gas Valve Knob Position/Burner Pattern
Page 6
Pinnacle Products International, Inc. Propane Cabinet Heater User’s Manual
Off
Pilot / IGN
Low
Med
High
