Pinion C-Line C1.12, Руководство пользователя

Страница: 14 / 36

MaIntenanCe
14
8
3
adjustIng shIftIng
your pinion gearbox is correctly adjusted if the shifting operation is performed imme-
diately (cable tension), all gears can be selected with minimum force (cable tension) and the display
on the rotary shifter matches the selected gear (synchronization).
adjustIng Cable tensIon
the cable tension is in the correct range if the ends of the shifting cable outer sleeves
are within the stops on the gearbox and rotary shifter housing without play and are not under tension
and it has approx. 2 mm rotary play.
Î Î
unscrew both adjusting screws ¼ revolution counterclockwise (+).
•
•
cable tension is increased.
•
•
Force required is increased.
or:
Î Î
screw in both adjusting screws ¼ revolution clockwise (-).
•
•
cable tension is reduced.
•
•
play on the rotary shifter is increased, the shifting operation is less immediate.
synChronIsIng rotary shIfter PosItIon
Î Î
shift rotary shifter clockwise (01–02–03– … ) to the stop towards the last position (12 or 09 or 06).
Î Î
check that the symbol for the last position (12 or 09 or 06) is centrally placed beside the mark (1) .
Î
Î
screw in adjusting screw (2) ¼ revolution clockwise (-).
unscrew adjusting screw (3) ¼ revolution counterclockwise (+).
•
•
the rotary shifter scale moves towards position 11 or 08 or 05.
or:
Î Î
unscrew adjusting screw (2) ¼ revolution counterclockwise (+).
screw in adjusting screw (3) ¼ revolution clockwise (-).
•
•
the rotary shifter scale moves towards position 01.
Î
Î
check setting and repeat procedure if necessary
1
2