Pinghu City Goldtier Children Products Hollicy SX1938, Руководство пользователя

Страница: 16 / 24

AA 1.5V
AA 1.5V
WARNING:
(1).Put the car on flat ground, don’t adjust the steering wheel, make the
steering wheel in middle position, turn on the power.
(2).When the car has been turned on, adjust the steering wheel to make
the wheels in right front position, then make steering wheel to keep
still.(3).Press the “speed selection” switch on remote control for 5
seconds until speed indicator light start to flash, then release the switch,
now adjustment is finished.
(4).If failed, please repeat the steps 1-3.
1 . When operating the car, the distance between the car which kid
sit in and the remote control which operated by adults should not be
more than 10 meters.
2 .The remote is only for adults to use, keep far away from child.
3 .Before using the remote, you must read the instruction manual
carefully, and operate the empty car first , only when knowing the
way of operation, you can use the remote with kid in the car.
4.Please switch to the "P"of the gear before you get on the car.
5.This product should not be used on traffic road and the place with
water and obstacles.
6 . To Avoid damaging the circuit, please keep the remote control
from wet and in rains.
7 .Don’t mix old and new batteries and different brands of dry
batteries.
8 . In order to avoid damaging the remote control, please take out the
batteries if not use the remote control for a long time to avoid battery
leakage and circuit corrosion.
9.Avoid dropping the remote control during using.
10.Install batteries with right polarity to avoid battery short circuit.
11.Charging must be done by adults. Non rechargeable batteries
can't be charged.
12.Exhausted battery should be removed from the toy properly and
prevent children from playing.
13.Take out the battery if no use for long time, properly handle the
battery, and prevent children from playing.
14.If the remote distance is less than 3 meters, it means the battery
is down in the remote control, it is time to change the 2 pieces of AA
alkaline batteries.
How to insert batteries: Use screwdriver to
loosen the screw on the back of the remote
control, open the battery cover, and install two
AA 1.5V alkaline type batteries according to the
diagram (Batteries are self-provided), then close
the battery cover,and fix with screw.