“O” position. Insert the power cord in the wall socket.
2. According to the Temperature Control Setting and Ironing Garment Methods,
turn the temperature Control dial to the correct temperature. When the pilot light
turns off, the required temperature is reached. The iron is ready for use.
3. After ironing, please turn temperature control dial to MIN position. Pull out the
plug, stand the iron upright, wait till it cools down completely and then pack it
away for storage.
SPRAYING
This function can be used any time and it does not affect the ironing temperature.
1. Fill water into the iron up to the Max level of water tank.
2. Aim the spray nozzle at the garment.
3. Press the Spray Button.
STEAM IRONING
This function provides an amount of steam to remove stubborn wrinkles.
1. Fill the iron with water up to the Max level water mark.
2. Turn the temperature control to the position Max.
3. The pilot light turns off when the required temperature is reached.
4. The iron is ready for use.
5. Switch the steam button to select the steam rate you want.
Normal steam:
or MAX steam:
.
6. Steam will penetrate into the garment removing the wrinkles.
7. After using the steam function, remember to set the steam button to
/
“O” position to avoid water leakage.
TEMPERATURE CONTROL SETTING & IRONING GARMENT METHODS
Always check your garment first to see whether a label with ironing instructions is
attached. Follow these instructions in all cases.
If the ironing instructions are missing, then the table below may help you.
If the fabric consists of various kinds of fibres, you must always select the lowest
ironing temperature of the composition of those fibres.
